PDA

View Full Version : Cutsheet Help?



momuzykent
03-06-2009, 08:09 PM
I have my dimensions for my box to build already. Can anyone help me out with a cut sheet, the dimenions are listed below:

2 pcs 20.75 x 10.50
2 pcs 12.75 x 10.50
2 pcs 12.00 x 10.50
2 pcs 13.25 x 10.50
2 pcs 33.00 x 20.25

Thanks,

Pioneer~Saturn
03-08-2009, 11:29 AM
Im kind of confused here..you just listed a cutsheet..?

audioarsonal
03-08-2009, 11:45 AM
Im kind of confused here..you just listed a cutsheet..?

I believe he wants a layout to see how many sheets he needs and make the most effeicent cuts.

With the deminsion listed you will be able to get all that from one sheet of MDF.

Pioneer~Saturn
03-08-2009, 11:45 AM
I see

audioarsonal
03-08-2009, 11:55 AM
You will need to cut 4 pieces to 10.5"x49" out of those you should be able to get the first 4 you listed 20,12.75,12,13.25.Then cut 2 pieces to 20.25"x49" and you will get the 33" pieces out of those.
Hope this helps.

momuzykent
03-08-2009, 04:34 PM
Yes that is what i was refering to, thanks!

IDSkoT
03-08-2009, 04:40 PM
http://img.photobucket.com/albums/v714/TwistedShot/cutsheetforfegs.jpg

Use the thing located in your head to figure out which piece is which. It wont' be hard, I promise.

IDSkoT
03-08-2009, 04:55 PM
****, I don't even get a thanks. That's cold

audioarsonal
03-09-2009, 07:59 AM
http://img.photobucket.com/albums/v714/TwistedShot/cutsheetforfegs.jpg

Use the thing located in your head to figure out which piece is which. It wont' be hard, I promise.

This is real nice but not the most effecient.Cutting all the similar widths out at once will be much easier.Once the width is cut all pieces will be almost exactly the same width and all that is needed is to cut each section off at the lenght you want.

momuzykent
03-09-2009, 09:48 PM
http://img.photobucket.com/albums/v714/TwistedShot/cutsheetforfegs.jpg

Use the thing located in your head to figure out which piece is which. It wont' be hard, I promise.


You will need to cut 4 pieces to 10.5"x49" out of those you should be able to get the first 4 you listed 20,12.75,12,13.25.Then cut 2 pieces to 20.25"x49" and you will get the 33" pieces out of those.
Hope this helps.

Thanks very much, I appreciate both of you helping me!

Thanks,

:D:D:D