PDA

View Full Version : ATTENTION: Car Audio/Security Installers! please read



eg9
02-22-2009, 04:42 PM
Just wondering if any installer out there that has access to the DEI tech website would be willing to hook me up with the diagram for the Viper model 5700 into a 2000 Honda CRV SE. Just pm me if you would be willing to help me out, thanks in advance.

Fiercetimbo17
02-22-2009, 04:44 PM
Constant 12V+ White Ignition Switch Harness
Starter Black/White Ignition Switch Harness
Ignition Black/Yellow Ignition Switch Harness
Ignition 2 White/Black Ignition Switch Harness
Accessory Yellow Ignition Switch Harness (Heat/AC)
Tach Blue 24 Pin Connector above Fuse panel
Neutral Safety Wire Gray (-) Gear Position Switch
Brake Switch Green/White Brake Switch
Trunk Release Yellow/White (+) Switch
Trunk Pin Blue/Black (-) 22 Pin Factory Alarm Connector behind Driver's Kick
Parking Lights Red/Black (+) Green Connector above Fuse Panel
Head Lamp Red/White (+) Fuse Panel Red/Blue High Beam
Factory Disarm Yellow Driver's Kick Panel this is Ignition. for Alarm use Relay
Door Trigger Light Green/Red (-) Gray Molex Driver's Kick or Alarm Connector
Door Lock Green/White (-) 22 Pin Factory Alarm Connector Driver's Kick
Door Unlock Green/Orange (-) Must use Relays
Driver's Lock Blue Left Kick Panel
Driver's Unlock White/Red Left Kick Panel
Passenger Unlock Yellow/Red Left Kick Panel
Horn Wire Gray/Silver (-) 22 Pin Factory Alarm Connector Driver's Kick
Windows Up LF=Red/Blue, RF=Blue/Yellow, LR=Green/Yellow, RR=Yellow
Windows Down LF=Red/Yellow, RF=Blue/Orange, LR=Green, RR=Yellow/Green

eg9
02-22-2009, 05:56 PM
thank you, will make it much quicker

THUNDERBIRD
02-22-2009, 07:35 PM
the12volt.com

eg9
02-23-2009, 06:30 AM
the12volt.com


excellent, I had forgotten all about that website, thanks again guys


:D

eg9
02-23-2009, 06:30 AM
as soon as a warm day gets here I can get this alarm installed

qkassidyw
02-27-2009, 11:04 PM
Constant 12V+ White Ignition Switch Harness
Starter Black/White Ignition Switch Harness
Ignition Black/Yellow Ignition Switch Harness
Ignition 2 White/Black Ignition Switch Harness
Accessory Yellow Ignition Switch Harness (Heat/AC)
Tach Blue 24 Pin Connector above Fuse panel
Neutral Safety Wire Gray (-) Gear Position Switch
Brake Switch Green/White Brake Switch
Trunk Release Yellow/White (+) Switch
Trunk Pin Blue/Black (-) 22 Pin Factory Alarm Connector behind Driver's Kick
Parking Lights Red/Black (+) Green Connector above Fuse Panel
Head Lamp Red/White (+) Fuse Panel Red/Blue High Beam
Factory Disarm Yellow Driver's Kick Panel this is Ignition. for Alarm use Relay
Door Trigger Light Green/Red (-) Gray Molex Driver's Kick or Alarm Connector
Door Lock Green/White (-) 22 Pin Factory Alarm Connector Driver's Kick
Door Unlock Green/Orange (-) Must use Relays
Driver's Lock Blue Left Kick Panel
Driver's Unlock White/Red Left Kick Panel
Passenger Unlock Yellow/Red Left Kick Panel
Horn Wire Gray/Silver (-) 22 Pin Factory Alarm Connector Driver's Kick
Windows Up LF=Red/Blue, RF=Blue/Yellow, LR=Green/Yellow, RR=Yellow
Windows Down LF=Red/Yellow, RF=Blue/Orange, LR=Green, RR=Yellow/Green


Wow...i guess no one cares anymore. I never give out DEI info, they can find it themselves.

eg9
02-28-2009, 06:39 PM
Wow...i guess no one cares anymore. I never give out DEI info, they can find it themselves.


The same thing he posted above is on the 12volt.com website not just the DEI website.

qkassidyw
03-01-2009, 10:52 PM
The same thing he posted above is on the 12volt.com website not just the DEI website.

Thank you...I knew I recognized that format.

My bad :crap: