PDA

View Full Version : Please! Enclosure help for two treo ssx 18's...



kowboy
02-19-2009, 07:43 PM
Treo's site recommends 4 cubes each and 50sq.in. of port per. That seems pretty small though, huh? Anybody have actual experience with these subs? They're going in a suburban with 6000 watts and 49x24x24 available to work with. Anybody? I'd pay for box plans with a cut sheet too. Lemme know. Thx...

MTX520
02-19-2009, 07:49 PM
Treo's site recommends 4 cubes each and 50sq.in. of port per. That seems pretty small though, huh? Anybody have actual experience with these subs? They're going in a suburban with 6000 watts and 49x24x24 available to work with. Anybody? I'd pay for box plans with a cut sheet too. Lemme know. Thx...

hit up member ~!PIONEER~SATURN!~...he the man at making box designs....i only go to him if i want a box design..

oldschoolboomer
02-19-2009, 07:51 PM
I had one in 4 with 52sq. in of port. It sounded good and did 145.2 in sb3. I spoke to John Henry (the designer of the sub) and he told me the 4.0 is the bare minimum and would be happier just under 6 cubes per with 14-16 sq. inches per cube

kowboy
02-19-2009, 08:59 PM
I had one in 4 with 52sq. in of port. It sounded good and did 145.2 in sb3. I spoke to John Henry (the designer of the sub) and he told me the 4.0 is the bare minimum and would be happier just under 6 cubes per with 14-16 sq. inches per cube

Okay... That's what I wanted to know. Thx... Any other opinions?