View Full Version : please help step by step of building a box for 15A
mdd99
08-22-2003, 11:33 PM
can you tell the step: what i need to buy, where to buy them...anything in the process of building a box... and if i dont' have the hole cutter thing where can i go to get a hole cut out..
thank for helping..
kingpin_jeffie
08-23-2003, 02:25 PM
4'x8' sheet 3/4" mdf
# 8 1 5/8" wood screws
Wood Glue
Silicone caulking
Jig Saw
Drill
All available at local hardware store.
u might wanna work out ur sizes 1st &how much mdf u need
kingpin_jeffie
08-23-2003, 11:42 PM
Well if its one of the boxes off eD's site then a 4x8 sheet will give you enough to build the box and have enough left over to build an amp rack or two.
mdd99
08-24-2003, 12:28 AM
# 8 1 5/8" wood screws
how many
is that 1 and 5/8 inches you mean
namster44
08-24-2003, 01:03 AM
yes, you will need about 100000, or more....
actually, 50 will be more than enough.
mdd99
08-24-2003, 02:12 PM
and where do you put the screw ..i dont' see anyone use screw for their box
musthavemuzk
08-24-2003, 06:18 PM
http://www.dbfanatics.com/forum/photo_album_cat.asp?sqldtl=16
while i have been told i go overboard with them....that is just how i do it.
look in the sub box category.
Monty
kingpin_jeffie
08-24-2003, 11:14 PM
musthavemuzk your quite mad you know.
but then again your attention to detail is probably why your hitting in the 150's with your A and I'm not.