View Full Version : 4x6,
02-12-2009, 10:35 PM
Do you think this has any purpose other than to keep water off the speaker?
I have to make a baffle for it, should I ditch this thing or use it?
02-13-2009, 11:06 AM
ditch it. looks like it came off of a GM, possibly a cavalier. I had them in mine and got rod of them.
I have my speakers mounted to the outside of my door panel. you could grab these tho
http://cgi.ebay.com/ebaymotors/4-x-6-to-6-5-Speaker-Adapter-95-05-Cavalier-Sunfire_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66 Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c2 93Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZ item360129983960QQitemZ360129983960QQptZCarQ5fSpea kers#ht_4093wt_1197
then you could stick most 6.5 drivers there.
02-13-2009, 11:08 AM
Yes those adapters are for a Cavalier. Basically they just held the 4x6 at a slight upwards angle for a little better imaging, but I had to completely remove mine to make a 5.25 fit. I'm sure a 6.5 could fit though. OP, yes ditch it and make a new baffle. I had to use 1/2'' because of clearance issues.
02-13-2009, 01:46 PM
Well, I already bought the 4x6's so guess I have to use it. The stupid holes dont line up so I have to figure out what way I want to go.
02-13-2009, 01:52 PM
can you return the 4x6? you will be much happier with 6.5s
02-13-2009, 02:09 PM
doubt it. ebay bought. I cant aford to go buy different ones right now. and i opened them and they may not take them back, then I have to pay shipping, too much loose.
02-13-2009, 02:48 PM
what 4x6s did you get?
02-13-2009, 02:50 PM
02-13-2009, 04:23 PM
They are nice 4x6s. Should get some good sound out of them. If you can remake that plastic baffle with some MDF, you would get better midbass response out of it.
02-13-2009, 04:46 PM
going to try a sheet of 1/4 inch template as an adapter...
02-15-2009, 12:27 PM
not good idea, came out like crap, so I guess I have to make a baffle completely from scratch.