PDA

View Full Version : Front stage questions



Go2Sleep
02-01-2009, 11:27 PM
Anybody got a quick min that could help me with a few questions before I make anymore purchases.

Questions concern wiring.

Post/PM me

Thanks.

Jeremy M
02-01-2009, 11:28 PM
fire away..i'll try to help.

dafobbishon3
02-01-2009, 11:31 PM
pm me. i'll see what i can do

Brian_smith06
02-01-2009, 11:36 PM
i can try to help you. just ask away in here

Go2Sleep
02-01-2009, 11:47 PM
Here it goes. My main objective is to upgrade the stock 6.5mids to ID OEM mids and push them with a 125watts.

I know nothing about front stage what so ever so with that said....

First of all I'm running everything off the stock oem stereo I have a hi-lo converter connected to my 6x9's for subs. I also have stock tweeters which i don't need to replace at the moment.

* In order to hook up the ID OEMs would i need to purchase anything else besides the amp? like crossovers or is that not necessary since i'm not buying a whole tweeter/mid/xover set

OK SO..................................

Mids = ID OEM (single 4ohm)

Lets say i bought this amp here:
http://www.icebuyer.co.uk/reference-7521a-2-channel-amplifier-p-11464.html

* 2-channel Amplifier
* 142 watts RMS x 2 channel at 2 ohms

I would need to wire parallel right? like this:
http://www.the12volt.com/caraudio/woofer_configurations.asp~Q~2~I~41

*2ohm load for 142watts


1) basically i need to know how to wire all this... what goes where?

2) how would i wire the subs in parallel if they're on opposite sides of the car?

3) should i be looking at a completely different amp or is this one fine?

Cpyder
02-01-2009, 11:49 PM
Why not post for all?