PDA

View Full Version : JL 300/2 for Hertz MLK



bgboost
02-01-2009, 12:22 PM
I just purchased a set of Hertz MLK 165 and a JL 300/2. I'm wondering if the 300/2 will be enough power for these components based on what I'm reading.

My initial thoughts are that it will be plenty, but now is the time to swap out amps while it is still new in the box. I have a JL 500/1 for my two 10w3s.

It's going in a 300zx which is a very compact car......

lyttleviet
02-01-2009, 05:26 PM
Nah.. Look into an ARC KS 300.4.. or something with lots of power. They will take it all and some.

macq32
02-01-2009, 07:45 PM
RF Punch 150, mine does 304x2 @4ohms

Brian_smith06
02-01-2009, 07:48 PM
I'm sure 150 going to each side will be plenty for your set(not familiar on specs on comps) especially considering your car is so small but it is always nice to have extra power on tap.

make sure you deaden your doors though

macq32
02-01-2009, 08:08 PM
if your not familiar with the set why are you saying its plenty? that doesnt seem to make much sense to me

bgboost
02-06-2009, 12:31 AM
Thoughts on the JL HD 600/4 Bridged for 300 watts RMS per Channel in passive mode?

boardroomjimmy
02-08-2009, 12:41 PM
I recently bought a 300/2 from online car audio because the price was so **** good. $229.00 with free shipping is hard to beat. It's powering a pair of alpine spx 17 pro's and does a good job. I'm quite sure there's better out there, but probably not for the money. I don't think you could put much more power to the alpines and have them live long. They sound fantastic, but at full volume, both the jl and the alpines are at their limit. (which is still **** loud) I'd try the jl in your case, it's a real 150 per side @ 0.03% thd.

boardroomjimmy
02-08-2009, 12:43 PM
What? you can't even say **** around here?

Psyence
02-08-2009, 01:09 PM
Ever look into Audison? And Audison 3.1K is a nice amp for 3 channels. 5.1K is barely any more than $100 more and that's a sweet 5 channel. Audison Amp specs for the 3.1K are 170Wx2 @4ohm, and 1x 1150 @ 2ohm. Can do all channels at 4ohm w/750W RMS on the sub channel. This nice thing about these amps is that the 2 channels are class A and the sub channel is class D in the same amp, very nice.

Also check out an Audison Bit One if you are integrating to stock head unit, awesome peice of equipment. Audison is pushing the envelope by introducing more modern technology into their car audio equipment.

Man, I sound like a salesman, lol.

speedfreak28
02-08-2009, 01:13 PM
Ever look into Audison? And Audison 3.1K is a nice amp for 3 channels. 5.1K is barely any more than $100 more and that's a sweet 5 channel. Audison Amp specs for the 3.1K are 170Wx2 @4ohm, and 1x 1150 @ 2ohm. Can do all channels at 4ohm w/750W RMS on the sub channel. This nice thing about these amps is that the 2 channels are class A and the sub channel is class D in the same amp, very nice.

Also check out an Audison Bit One if you are integrating to stock head unit, awesome peice of equipment. Audison is pushing the envelope by introducing more modern technology into their car audio equipment.

Man, I sound like a salesman, lol.

that would sound great :) i love my audison amps, best ive owned to date.
PS, sick setup psyence, that probably sounds incredible. How do you like that processor? its my next big investment.