PDA

View Full Version : 4 type r 12" box design wanted



dumpin907
02-01-2009, 02:52 AM
if anyone knows a good box design site or wants to help me design a box that would be great.

nothing too crazy, just ported at 31hz and ill give you my exact dims and all later.

going in a jeep cherokee, amp- zx25001

rough dims.. 43L 22D 25H

subs up, port back, wanting to do a horizontal slot port on the bottom facing the back

thanks,

perfecxionX
02-01-2009, 03:18 AM
thats going to be a tight fit getting four 12s on the top of that box, you should get more precise dimensions to be sure.

dumpin907
02-01-2009, 03:59 AM
thats going to be a tight fit getting four 12s on the top of that box, you should get more precise dimensions to be sure.

yeah thats my only problem. how close can i get to my back hatch? about 3-4 in?

cshaw
02-01-2009, 04:03 AM
yeah thats my only problem. how close can i get to my back hatch? about 3-4 in?

stager the subs to save room. keep the box at least a ports width away from the hatch, airflow is key.

dumpin907
02-01-2009, 04:05 AM
stager the subs to save room. keep the box at least a ports width away from the hatch, airflow is key.

ha yeah i just started to draw it out staggerd and it should work out, would 43 wide be enough for 4 12's you think

Skip01
02-01-2009, 11:45 AM
Not with 22in depth

Of course you could always put the subs facing diff directions

2 up and 1 on each side...........what vehicle?

PSturmer
02-01-2009, 12:02 PM
i did a system once in a cherokee. 4 12'' type r's off 5k rms. it was ridiculous on the lows and still had a lot of output. if you are interested just shoot me a pm.