PDA

View Full Version : This about right?



Phlipbak
01-26-2009, 02:28 PM
Alrighty,

Well Pioneer~Saturn is gonna build me a sick sealed box for my 2 havoc 12's (Dual 1 ohm :)) with his amazing craftmanship so I'm pretty stoked :)

He was originally going to do about 2.5 cuft sealed, but we decided to take it down to 1.04 per sub.

Is this alright? I just saw a guy doing a sealed box for 4 of them with 10 cu ft total.. That's like 2.5 per sub, but I saw on AA.com where they should be between .6-1.2 cu ft per.. Should my box be a bit bigger?

Suggestions please :)

Trevor

JimJ
01-26-2009, 02:31 PM
I wouldn't worry about it if you're in the middle of the recommended :)

Phlipbak
01-26-2009, 02:33 PM
Ok cool, is it better to go at the middle or maximum recommended?

tRiGgEr
01-26-2009, 02:38 PM
Ok cool, is it better to go at the middle or maximum recommended?

Depends on what you want.

Designing a box around the center of the recommended specs will normally yield a flatter response curve, and overall smoother response.

Phlipbak
01-26-2009, 02:56 PM
I need as much output as possible without damaging the subwoofers because of too big of a sealed box..

Phlipbak
01-26-2009, 05:04 PM
I need this answered like now guys.. lol

Louisiana_CRX
01-26-2009, 05:24 PM
it should work fine :)

Cabin_Pressure
01-26-2009, 05:26 PM
Just asking, any reason for sealed? SQ? Lack of room for bigger enclosure?

Phlipbak
01-26-2009, 09:24 PM
Because I listen to a LOT of metal and from my experience with sealed it's just much punchier on quick kick drum hits and such

Phlipbak
01-26-2009, 10:51 PM
...?

BrianChia
01-26-2009, 11:43 PM
That size sounds fine. You can play with stuffing it and see what sounds best to you. Stuffing will create an effect of a slightly larger enclosure which will could possibly increase low end output.

tRiGgEr
01-27-2009, 11:03 AM
1.04ft^3 per sub is fine. what else do you want to know...