iceteebone

08-12-2003, 04:07 PM

this is dumb question but could someone tell me how to figure out cubic feet.

View Full Version : box size

iceteebone

08-12-2003, 04:07 PM

this is dumb question but could someone tell me how to figure out cubic feet.

ss3079

08-12-2003, 04:28 PM

L x W x H / 1728

12 x 12 x 12 / 1728 = 1ft^3

Be sure to take the thickness of wood into consideration. So if using standard 3/4" material, and your length is 35", it becomes 34.25" in your equation.

So a 12 x 12 x 12 box is 1ft^3 external, and

11.25 x 11.25 x 11.25 = .8239ft^3 internal (worry about this measurement).

- Steve

12 x 12 x 12 / 1728 = 1ft^3

Be sure to take the thickness of wood into consideration. So if using standard 3/4" material, and your length is 35", it becomes 34.25" in your equation.

So a 12 x 12 x 12 box is 1ft^3 external, and

11.25 x 11.25 x 11.25 = .8239ft^3 internal (worry about this measurement).

- Steve

Trixter

08-13-2003, 10:22 AM

L x W x H / 1728

12 x 12 x 12 / 1728 = 1ft^3

Be sure to take the thickness of wood into consideration. So if using standard 3/4" material, and your length is 35", it becomes 34.25" in your equation.

So a 12 x 12 x 12 box is 1ft^3 external, and

11.25 x 11.25 x 11.25 = .8239ft^3 internal (worry about this measurement).

- Steve

Wouldn't the measurements turn into 10.5 x 10.5 x 10.5? Don't you count both sides?? Have I been doing it wrong all these years??? :confused: :eek:

12 x 12 x 12 / 1728 = 1ft^3

Be sure to take the thickness of wood into consideration. So if using standard 3/4" material, and your length is 35", it becomes 34.25" in your equation.

So a 12 x 12 x 12 box is 1ft^3 external, and

11.25 x 11.25 x 11.25 = .8239ft^3 internal (worry about this measurement).

- Steve

Wouldn't the measurements turn into 10.5 x 10.5 x 10.5? Don't you count both sides?? Have I been doing it wrong all these years??? :confused: :eek:

BDIDDY

08-13-2003, 12:51 PM

So then it becomes, .669921875 cuft.

ss3079

08-13-2003, 02:50 PM

Wouldn't the measurements turn into 10.5 x 10.5 x 10.5? Don't you count both sides?? Have I been doing it wrong all these years??? :confused: :eek:

Yeah, you're right ... I wasn't thinking :(

- Steve

Yeah, you're right ... I wasn't thinking :(

- Steve

Trixter

08-13-2003, 03:21 PM

wheww...that was close...I thought I was loosing it for a min.

ss3079

08-13-2003, 03:43 PM

wheww...that was close...I thought I was loosing it for a min.

I can't loose 'it' ... I've never had 'it' ;)

- Steve

I can't loose 'it' ... I've never had 'it' ;)

- Steve