PDA

View Full Version : need design for 05 dodge ram...



Lilmofo55
01-17-2009, 07:59 PM
need a design for two 8's...under rear seats...any ideas?

JB

dbeez
01-17-2009, 08:29 PM
pioneer-saturn and hes in dayton pm him and he can help ya

bones22
01-17-2009, 08:30 PM
what 8's are you wanting to run?

Lilmofo55
01-18-2009, 10:52 AM
Two of those sundown e8's pickin up from woofercooker. Just tryin to get an idea of what I could do. Went out and took some measurements last night on my own sealed design and came up with about .68 cubeft.

kmanian
01-18-2009, 12:14 PM
If it is a quadcab, I have a MTX thunderform box with 10" holes you could make plates for. $50 plus shipping.

Lilmofo55
01-18-2009, 04:15 PM
If it is a quadcab, I have a MTX thunderform box with 10" holes you could make plates for. $50 plus shipping.


Is the ram 1500 quad cab...pics of thunderform? and it's not the plastic thunderform is it? Wanted to do either fiberglass or mdf.

kmanian
01-18-2009, 04:22 PM
Is the ram 1500 quad cab...pics of thunderform? and it's not the plastic thunderform is it? Wanted to do either fiberglass or mdf.

it is abs plastic. 1/4-3/8" thick. You will spend a crap load on fiberglass to duplicate it. and MDF will thake up useable space.

It is totally up to you obviously;)

Lilmofo55
01-18-2009, 08:20 PM
it is abs plastic. 1/4-3/8" thick. You will spend a crap load on fiberglass to duplicate it. and MDF will thake up useable space.

It is totally up to you obviously;)

What could be used to take the 9" hole down to 7"?

zierbox
01-19-2009, 04:36 PM
I have the box that SLAMS in those trucks


http://i217.photobucket.com/albums/cc19/zierbox/cxtdgebx016.jpg

http://i217.photobucket.com/albums/cc19/zierbox/cxtdgebx008.jpg

http://i217.photobucket.com/albums/cc19/zierbox/cxtdgebx007.jpg

Lilmofo55
01-19-2009, 11:01 PM
still have the design template with measurements/angles... zierbox? pictures at this point dont really help. thanks

JB

Lilmofo55
01-22-2009, 11:50 AM
it is abs plastic. 1/4-3/8" thick. You will spend a crap load on fiberglass to duplicate it. and MDF will thake up useable space.

It is totally up to you obviously;)

pm'd

kmanian
01-22-2009, 11:55 AM
pm'd

hit me again, I don't see it