PDA

View Full Version : Craftsman Accu-Rip Saw Guide



fatboyracing
01-09-2009, 11:47 AM
Lets say $28 price drop shiped

this will make perfict staright cuts

The Accu-Rip allows the user of a right-hand blade circular saw to make straight accurate rip cuts, without the use of measuring tape or chalk line.

The Accu-Rip quickly attaches to the front of the base plate of a circular saw. The user can then adjust the sliding guide to desired cut widths from 1/16 to 24 in. The Accu-Rip does not have to be removed from the saw when making crosscuts. The level of skill to use the Accu-Rip is low. Lightweight and portable.


http://i219.photobucket.com/albums/cc295/fatboyracingpics/100_0470-1.jpg
http://i219.photobucket.com/albums/cc295/fatboyracingpics/100_0471.jpg
http://i219.photobucket.com/albums/cc295/fatboyracingpics/100_0472.jpg
http://i219.photobucket.com/albums/cc295/fatboyracingpics/100_0470.jpg

da box king
01-09-2009, 11:53 AM
I may take this

fatboyracing
01-09-2009, 11:55 AM
I may take this

just let me know

da box king
01-09-2009, 11:58 AM
does it work with any saw, and how long of cuts does it make?

fatboyracing
01-09-2009, 12:07 PM
works with any saw qs long as a cut as you want but up to 24ins wide

fatboyracing
01-09-2009, 01:08 PM
lots of pms fast no one has took them yet

Rashaddd
01-09-2009, 01:12 PM
can you explain a little better how it works and what it's capable of

fatboyracing
01-09-2009, 01:18 PM
What you do is attach you circular saw to it slide the ajustment to how wide you want the cut if you want a peice of wood 6 in long set it at 6 in if 10 then set at 10 24 set at 24 ect then the edge of the guide rides down the edge of the wood and your saw cuts the width right where you want it

here are the discription from craftsman

The Accu-Rip allows the user of a right-hand blade circular saw to make straight accurate rip cuts, without the use of measuring tape or chalk line.

The Accu-Rip quickly attaches to the front of the base plate of a circular saw. The user can then adjust the sliding guide to desired cut widths from 1/16 to 24 in. The Accu-Rip does not have to be removed from the saw when making crosscuts. The level of skill to use the Accu-Rip is low. Lightweight and portable.

fatboyracing
01-09-2009, 01:35 PM
going to post office in a few mins if anyone wants this let me know now or it will ship monday

fatboyracing
01-09-2009, 03:42 PM
Trades I am looking for are kinetik hc1400 or a set of 6.5s let me know what you have I have cash to add

etznova
01-09-2009, 03:57 PM
so if the edges of whatever your cutting aren't straight or square your cut is still goign to ****

otherwise its seems like a cool little device

fatboyracing
01-09-2009, 04:05 PM
so if the edges of whatever your cutting aren't straight or square your cut is still goign to ****

otherwise its seems like a cool little device

if they are not square you are right but if they are a lil wavy it will be straight becouse it was a wide enough guide

fatboyracing
01-09-2009, 09:46 PM
ttt

cf2004
01-09-2009, 09:52 PM
gl bump for you. I have this guide and love it! Its great for long rip cuts and such. Just set the width and start ripping!

fatboyracing
01-10-2009, 12:03 AM
gl bump for you. I have this guide and love it! Its great for long rip cuts and such. Just set the width and start ripping!
ya If I did not have a table saw I would keep it

fatboyracing
01-10-2009, 01:44 AM
going to bed i will check in the morning

fatboyracing
01-10-2009, 10:05 AM
price drop

fatboyracing
01-10-2009, 11:02 AM
will consider trades for a kinetik hc1400 and nice 6.5s of course plus cash from me

fatboyracing
01-10-2009, 11:45 AM
no longer the 6.5s but tweeters or crossovers

fatboyracing
01-10-2009, 04:16 PM
ttt