PDA

View Full Version : problem with autopage alarm system



spindrift0
01-06-2009, 01:17 PM
i purchase and had installed an autopage alarm system two years ago. it worked great until a month ago when the alarm started going off randomly. there aren't any apparent triggers for the alarm (no big trucks driving by or people near the car). i don't know how to stop it from going off. any suggestions?

Duct Tape
01-08-2009, 07:06 PM
do you have a hood pin switch? it is pretty common for these to fail after a couple years. try disconnecting it if you have one.

there should be a section in the manual where it will tell you what zone was triggered by counting the flashes on the LED after you disarm the alarm.

other than that, i would go back to where you had it installed. you will most likely void any warranty you have if you go digging around in the wiring yourself.