View Full Version : My home audio sub enclosure

12-21-2008, 01:21 PM
Well, posted this in the enclosure area, but figure I"ll post it here too.

So, caraudio.com/forum isn't working ATM, and typed this out, so might as well share it with you guys so I don't lose the whole thing.

Didn't take many pics, as it's not done 100% yet. I'll post up more. It's a 2.2 cube enclosure at 32hz for a single 10, 4" aero port using PVC. The sub enclosure is integrated into a larger enclosure, so I have a storage area. This will be a foot stool/seat since it's taller than ideal for when sitting on most couches. Have a velodyne 200rms, 400 max amp in there, it's PLENTY.

I used an ***-ton of screws on the sub/aero mount board because I did not glue this one. I decided to silicone the **** outta it, because I may want to switch sub sizes, but dont' want to make the whole thing again. Barely got all the pieces out of a 4x8 sheet, which is up to $26 here:eek: Still have to fab up some feet out of something, and mount the remote for the amp. The top will get some type of cushion, and the interior lined with a thing foam/carpet so rattles will be quiet.

It'll be PLENTY for my dorm room:laugh: Thoughts/opinions? Oh, all done with a circular saw and router. No flush cut bit. Biggest variation in cuts was 1/10" :cool:

http://img211.imageshack.us/img211/9893/cimg2981resizedjv7.th.jpg (http://img211.imageshack.us/my.php?image=cimg2981resizedjv7.jpg)
http://img211.imageshack.us/img211/954/cimg2980resizedej0.th.jpg (http://img211.imageshack.us/my.php?image=cimg2980resizedej0.jpg)
http://img211.imageshack.us/img211/2185/cimg2978resizedvs0.th.jpg (http://img211.imageshack.us/my.php?image=cimg2978resizedvs0.jpg)