PDA

View Full Version : How should i cut mounting rings?



NitroDuck
08-01-2003, 02:18 PM
If the sub specs say mounting diameter is 9 3/16 for a 10in sub, should i cut a 9 3/16 hole or can I still get away with cutting a 10in hole?

ramos
08-01-2003, 02:45 PM
9 3/16" or just a 16th bigger. If you cut a 10" hole. There's no wood for the screws. Also the sub might fall through the hole. 10's aren't always 10" exactly. Other sizes are the same way. :)