PDA

View Full Version : Too many spacers? ( component install)



UNDERGROUND_BUM
12-19-2008, 01:00 AM
i feel like the sound is getting caught in the door
panel of my 06 civic sedan. I think its creating more rattles and not letting as
much sound as it should into the cabin.

This is a sketch of what i sort of want to do (stolen from someone on diyma ) :
http://i40.tinypic.com/33cnrz9.jpg
my door panel is much thinner and my spacers would come out flush with the outside of the door panel. The spacers/baffle for my doors would have to be about a total of 2.25 " deep for it to bring my speakers out from under the panel and sit flush. The speakers by the way are morel tempo 6's.........

does anyone with a more knowledge in car audio/acoustics see a problem with doing this?

James Bang
12-19-2008, 01:28 AM
That sure is a **** sketch.

I've done that foam gasket between the driver and the door panel before. My goal was to have to the speaker play directly out of the door panel's grill and to not have any of the backwaves interfere.

That person has be beat by .75"

I only have four 3/4" layers :(

http://i8.photobucket.com/albums/a11/mobster909/New%20install/IMG00076.jpg

UNDERGROUND_BUM
12-19-2008, 01:35 AM
nice...........

u think i'll be ok then with only needing 2.25" Depth to get the speaker out beyond the panel(flush) ?
i think i only have enough space to do Circle spacers, not enough room for oval or bigger spacers. : (

James Bang
12-19-2008, 01:41 AM
I don't have your door in front of me...

UNDERGROUND_BUM
12-19-2008, 01:52 AM
i'll get you some pics of the door, door panel, and the speaker hole tomorrow ; )

UNDERGROUND_BUM
12-19-2008, 02:44 AM
got some pics tonight..............

pic of the back of door panel :
http://i42.tinypic.com/aa88xt.jpg


front of the door panel (stock grill would be cut out) :
http://i39.tinypic.com/k9z7dv.jpg


baffle/spacers would be flush with the door panel with morel grill attaching to the speaker :
http://i39.tinypic.com/2a7u2ye.jpg


where the baffle/spacers would be mounted to (deflex pads need to be added / and more raammat):
http://i40.tinypic.com/mjuux3.jpg