PDA

View Full Version : flush mounting size



taintedplay
12-14-2008, 04:32 PM
im wanting to flush mount my two 12's, how much bigger should the top baffle be than the bottom one? an inch (radius)?

Joseph K
12-14-2008, 04:40 PM
Whatever the outside diameter of the sub is... just get a ruler and measure it.

mlstrass
12-14-2008, 04:48 PM
I do them 1/4" bigger then OD of the sub...

ramos
12-16-2008, 09:39 AM
I do them 1/4" bigger then OD of the sub...

me too, 1/8" - 1/4" larger. I hate trying to get subs back out otherwise lol :)

k_schutte
12-16-2008, 12:27 PM
me too, 1/8" - 1/4" larger. I hate trying to get subs back out otherwise lol :)

seriously...
I cut mine the exact same size for me XXX and then when it came time to pull the sub back out it went a little somthing like this: :):wow::(:mad::verymad::crying:

PSturmer
12-16-2008, 01:03 PM
when properly done, flush mounted with very little space looks best. in this setup the aeros have external wing nuts. this way you can take an aero out and push up from below.

http://i24.photobucket.com/albums/c8/psturmer/4%2012s%20LINNELL/alex33.jpg

ramos
12-16-2008, 01:48 PM
when properly done, flush mounted with very little space looks best. in this setup the aeros have external wing nuts. this way you can take an aero out and push up from below.

http://i24.photobucket.com/albums/c8/psturmer/4%2012s%20LINNELL/alex33.jpg



So how do you go about getting a sub out, that is flush mounted in a sealed enclosure? Yank the enclosure and turn it upside down? Fark all that :)