PDA

View Full Version : ATTN: buick owners



lincolntc690
12-12-2008, 08:00 AM
where can i get a monuting kit to fit a 9887 in a 1999 park ave? with all the rca's hooked up i cant push the 9887 in, no rear clearance! anyone have any suggestions?:confused:

i already used the heat gun on the ducting too, need around another inch.

lincolntc690
12-12-2008, 08:24 AM
ttt

lincolntc690
12-12-2008, 08:54 AM
ttt

lincolntc690
12-12-2008, 09:49 AM
wtf no one knows

scarolinablazin
12-12-2008, 09:52 AM
stop bumping the thread assclown

blackman
12-12-2008, 09:58 AM
just force it in.

scarolinablazin
12-12-2008, 10:04 AM
just force it in.

yea, and when you break the rcas and stuff off in the back of it it'll actually work even better. hopefully you don't listen to this ignorant assholes advice.

have you tried googling what you need??

lincolntc690
12-12-2008, 10:05 AM
cant no room, if the rca's weren't built into the chassis of the radio, it wouldnt be a problem

and SC, how did you know, thats your moms pet name for me, while i piihb?

and thanks for the bump:D

scarolinablazin
12-12-2008, 10:05 AM
http://www.google.com/search?num=50&hl=en&newwindow=1&safe=off&client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&hs=gn9&q=dash+kit+to+fit+a+9887+in+a+1999+park+ave&btnG=Search

scarolinablazin
12-12-2008, 10:07 AM
cant no room, if the rca's weren't built into the chassis of the radio, it wouldnt be a problem

and SC, how did you know, thats your moms pet name for me, while i piihb?

yea she told me about the guy with the micro ***** thats like 11mm long. from ohio i think. said he was also one of the dumbest ******* people she has ever met in her life.

lincolntc690
12-12-2008, 10:11 AM
wasnt me, mines only 8mm, maybe my brother?? :D i did google, but i need more clearance, the kits arent enough

scarolinablazin
12-12-2008, 10:13 AM
if the kits aren't enough you can get right angle adapters for you rca outputs to gain a little bit of clearance.

lincolntc690
12-12-2008, 10:16 AM
its for a friends install, i might have to trade him my 880 since the rca's are wired.

which ***** since i just traded my 9887 for the 880 a month or so ago,

lincolntc690
12-12-2008, 10:17 AM
i thought of that too but were goin active, theres no way to get 3 sets of angled rca's in the h/u

lincolntc690
12-12-2008, 10:27 AM
without the rca's and wiring harness the heat sink touches in the back so it just barely fits, @#%
alpine's mounted rcas:D

scarolinablazin
12-12-2008, 10:40 AM
build a floor console to house the headunit and put some volt gauges or something where it was.

natisfynest
12-12-2008, 10:43 AM
try these

http://www.onqlegrand.com/images/product/large/F2218-lg.gif

sue bee
12-12-2008, 10:43 AM
try these

http://www.onqlegrand.com/images/product/large/F2218-lg.gif

Yea, do this. Also, try dremmeling some **** for more space.

scarolinablazin
12-12-2008, 10:45 AM
try these

http://www.onqlegrand.com/images/product/large/F2218-lg.gif


Yea, do this. Also, try dremmeling some **** for more space.

can't use those going active. would be no left right channel seperation

lincolntc690
12-12-2008, 10:47 AM
no more to dremel, i used a heat gun on the heater ducts and cut what was in the way!
i cant use angled rcas because of how and where the rcas are on the h/u

lincolntc690
12-12-2008, 10:50 AM
build a floor console to house the headunit and put some volt gauges or something where it was.

this is a future project since he doent like that the middle is all open (across the floor) i have a 6-8" center channel idea:D

natisfynest
12-12-2008, 10:50 AM
can't use those going active. would be no left right channel seperation

thats the only pic i found but couldnt he just use 2 single 90 degree adapters

lincolntc690
12-12-2008, 10:54 AM
i cant find a pic of the 9887 connection side, but the way its set up you couldnt get 3 sets of angled to plug into the h/u

natisfynest
12-12-2008, 11:07 AM
well then you have few options you can

a)build a floor console
b) take the headunit apart and solder in some different rca connections
c)get a new head unint with different rca connections
d) be SOL