View Full Version : Morel Tempo 6's

12-09-2008, 10:36 PM
I plan on getting a pair of morel tempo 6's for my car and power them with a Diamond D3 500.4 amp. I have been told in the past by a few members that if I bridge the amp and give each speaker 250 watts rms, they will be fine. Is that true? Will my speakers be able to handle all of the power being pushed their way or will they burn up?

12-09-2008, 10:43 PM
morels csan handle lots of power but your best bet is to go morels we-site to find the right specs or power handling so you wont void the msg warranty

12-09-2008, 10:46 PM
They are rated at 120 wrms.

12-09-2008, 11:13 PM
If 120 is rms them you should use the deck xover to cross them over @ 80hz,but if you cross them over @120hz then you should be able to send them more power which they will be louder, but 120 should loud enough thats if you deaden your doors & mount them well.

12-10-2008, 01:25 AM
Dont forget you will be running your comps mono if you do this.

12-10-2008, 01:35 AM
I am running the KS 300.4 bridged (350x2) to mine and they are fine. Set your gains right and you'll be perfect. I enjoy having the headroom. The speakers can take MUCH more than their rated 120wrms I guarantee you that :).