PDA

View Full Version : CDT ES-62i question



P.rick
11-30-2008, 09:25 PM
i was wondering since they are rated 200rms if they will come alive if im running them of 90rms a piece? thanks in advance



Model: ES-62i GOLD (6.5" 2-way)
Midrange: 6.5" Cast
Crossover: EX-5601Transient Optimized Elliptic 4th order 2-way
Tweeter: DRT-26 extended range modular 1 silk tweeter. aluminum and titanium twtr drivers available
Power handling: 200 watt RMS @ 100Hz High Pass
Frequency response: 60-20kHz
Sensitivity: 92.4 dB.
Impedance: 4 Ohm
Surface & flush mount tweeter

okiedokie
12-01-2008, 01:41 PM
yes they will be loud

titanle
12-03-2008, 01:09 AM
im running my ex-63i golds on 100rms and they get very loud!

kingfish405
12-03-2008, 07:25 PM
you should be ok with 90 watts. make sure those are clean rms watts and not some 90watts peak cheapo amp

im feeding my 63i with 200watts from an orion 800.2. they handle the watts pretty good.

okiedokie
12-03-2008, 07:56 PM
I have around 130watts per side on my 2009 es62i mids and i feel the upper mid & lower mid bass which come alive

king ranch
12-03-2008, 07:57 PM
i got 175rms per side on my cdt cl-62cf's only rated for 160 but they are doing fine and scream and sound so good more power more midbass too, but they keep up with my subs pretty good

okiedokie
12-03-2008, 07:58 PM
yeah they keep up with my 12w6v2 sub as well