PDA

View Full Version : slot or square? which is it?



kun3racer
11-30-2008, 01:23 PM
would this be considered a slot or a square port? no bends and no divider. since theres an option for "square" or "slot" on the port calculator, which do i select for this type of port?

http://img.photobucket.com/albums/v203/kun3racer/IMGP2197.jpg

ABSOLUTEAUDIO
11-30-2008, 01:26 PM
slot!!!! You are using the out side of the enclosure as part of the port (top+bottom of the enclosure to make the port)

Rashaddd
11-30-2008, 01:39 PM
is that 1/2" mdf?

schrummy
11-30-2008, 01:45 PM
i think it is

x2o
11-30-2008, 01:46 PM
Slot port in my opinion.

A square is a rectangle, but not all rectangles are squares. Only squares are squares, that is not a square, therefore it is a rectangle that is not a square. Slot port!

kun3racer
11-30-2008, 02:04 PM
hahaha no its 3/4" mdf...i think it looks thin because i sanded the edges down to round it a little...plus its a huge box, around 10 cubes gross so its probably making the wood look thinner than it is.

Rashaddd
11-30-2008, 02:05 PM
hahaha no its 3/4" mdf...i think it looks thin because i sanded the edges down to round it a little...plus its a huge box, around 10 cubes gross so its probably making the wood look thinner than it is.

Really? are those mounting holes for 15's?

kun3racer
11-30-2008, 02:10 PM
yes its a box for 15's...i measure 3/8 from the edge to mark my screw holes.