View Full Version : 2007 scion tc
11-29-2008, 12:15 AM
Im installing a hornet 569t on a scion with a fortin sl2 bypass. the hornet doesnt come with a 2nd stater wire and the scion needs one. What do i do? also has anyone worked with one of these bypasses? i cant get it to program. thanks
11-29-2008, 08:34 AM
11-29-2008, 10:17 AM
bump again. please guys i really need some help with this
11-29-2008, 03:36 PM
for the second starter you are going to need to wire up a relay for second start...im not familiar with that exact hornet but if its anything worth a **** it should have a (-) second starter output wire...use that to drive a relay...as for the bypass if its not programing its either wired wrong or you are not programming it correctly.
11-29-2008, 05:57 PM
x2 on everything. but the second starter is a wire on a 4 pin plug that goes on top of the relay pack.
11-30-2008, 07:37 PM
hey guys i just wanted to update that everything works except it doesnt start. this bypass is giving me alot of problems programming. i activated the remote start then held the key to the ignition barrel and it starts so i know its the bypass. i usually work with idatalink so i am unfamiliar with fortin. all my connections are good i triple checked. the only question i have is the keysense wire is 12v at rest then when i put in the key it goes to 0. does this means it grounded out? has anyone ever worked with this bypass? thanks in advance