PDA

View Full Version : Need some opinions on a box for a SE



lowriderram_95
11-28-2008, 07:14 PM
Ok so I know that RE recommends only 2 cubes sealed for their 15 SE but I was wondering if any of yall have experience with these subs? I'm thinking of doing a sealed box that is 2.8 cubes before displacement. Any opinions???

revrider1
11-28-2008, 07:15 PM
Should be ok

azimuth
11-28-2008, 07:17 PM
it'll work well. you might like a bigger box.

lowriderram_95
11-28-2008, 07:19 PM
Should be ok

That's what I was thinking, I thought I could just fill it up with polyfill and it would be ok to build it a bit bigger than recommended.

azimuth
11-28-2008, 07:22 PM
That's what I was thinking, I thought I could just fill it up with polyfill and it would be ok to build it a bit bigger than recommended.

no. don't use polyfill. you use that if you are too small. paint the inside with cheap paint

lowriderram_95
11-28-2008, 07:25 PM
no. don't use polyfill. you use that if you are too small. paint the inside with cheap paint

ok two questions, would spray paint work and secondly how big should I make the box? I have enough room to make a 4 cube box...

80INCHES
11-30-2008, 09:45 PM
make it 3kubes sealed

80

loud-n-low
11-30-2008, 09:49 PM
i bought a se15 a month ago. im using a 3cube sealed with polyfill. hits low and sounds amazing. 1000 watts also