PDA

View Full Version : 18" FI Q Enclosure



farmerehsan
11-22-2008, 05:32 PM
Hi i need some help to make a box, i kno nothing about it.

I have a nissan xterra 2004 dimenions 3x2x 1.5.

i would liek to use the smallest box possible according to the knowledgable on here.......


Q18


DUAL 1 | DUAL 2

Fs: 24.5 Hz | 23.8 Hz
Re: 0.7 Ohms/coil | 1.4 Ohms/coil
Qms: 5.66 | 5.73
Qes: .64 | .63
Qts: .58 | .57
Mms: 322g | 342g
Cms: 0.13mm/N | 0.13mm/N
Sd: 1210cm^2 | 1210cm^2
Vas: 268 l | 268 l
Spl: 89.7dB 1W/1m | 89.4dB 1W/1m
Bl: 10.4 N/A | 15.1 N/A
Xmax: 27mm
Rms: 1000W
Sealed box: 4-8 cuft
Ported box: 6-10 cuft @ 28Hz
Sub OD: 18.500
Cut ID: 16.750
Mounting depth: 10.000
Displacement: 0.24cuft


can i do a 6 cuft box? a 2 x 2 x1.5?
any help thanks

ARSkemp
11-23-2008, 12:14 AM
First, if the box is 2' x 2' x 1.5', then its not going to be 6 ft^3. Displacement of wood/sub will make it smaller, especially if you want it ported (you have to then take into account the displacement of the port as well).

edit:

Is 3x2x1.5 your max dimensions? Every inch helps, and if those are your dimensions you will probably be able to barely fit a 6 ft^3 (internal) ported box into your trunk.

IDSkoT
11-23-2008, 12:18 AM
With those measurements, using 3/4" MDF (which is recommended), the max gross space you can get is 4.83... which is barely enough for sealed... and when you factor in the sub's displacement, you're left with a measly 4.59 cuFt.

I say either get more room, or get the 12, or 15.

Rashaddd
11-23-2008, 12:50 AM
First, if the box is 2' x 2' x 1.5', then its not going to be 6 ft^3. Displacement of wood/sub will make it smaller, especially if you want it ported (you have to then take into account the displacement of the port as well).

edit:

Is 3x2x1.5 your max dimensions? Every inch helps, and if those are your dimensions you will probably be able to barely fit a 6 ft^3 (internal) ported box into your trunk.

:yumyum: @ your avatar

send me fullsize pics...now!