PDA

View Full Version : Need box plans, have $$



pre98zetec
11-19-2008, 10:46 PM
I'm having a hard time trying to figure out some plans. Here's what I got


01 Blazer, 4dr

36" wide (37" MAX)
22" high (want to keep it close to rear window height)
and 33" deep.

I'm trying to get atleast 11 cubes net before port displacement. I'm wanting to run 4 RE SR15's. 12 cubes @ 34hz is what i'm aiming for with 120-140 sqin of port.

at the least, 10.5 cubes @ 34hz and 120sq in. Now I'm pretty sure I can't fit this with a slot port but what about aeros? I'm pretty new to aeros and unsure on how to calculate them.

Can anyone hook me up with a solid set of plans? Or atleast tell me first if my space limitations are going to make it impossible for me to fit the box I need?

s Beatz
11-19-2008, 10:47 PM
Ask Pioneer~Saturn very good guy, does nice box designs he actually did mine for me and didnt ask for a penny but i felt bad after he designed like 4 for me so I had to give him some money for his time. I recommend him:)

9seconlives
11-20-2008, 03:08 AM
IMO the aero ports are ALOT easier to determine than slot ports...sure seems ike you have enough airspace but like you said, i don't think you'll be able to run L ports unless you invert 2 of the subs and run them isobaric? not very popular these days i know except in show BUT it's a thought..

pre98zetec
11-20-2008, 09:30 AM
Not liking the idea of inverting them. My windows are only stock tint and it will draw even more attention. While I do live in a small town and i live in the country I still dont want attention being drawn when the truck is sitting. which is why I initially want the box below window or even to window level

I did some research last night, it seems if I get the box 12.5 cubes and use 4 6" aeroports each 16.7" long it would be tuned to 34hz, and in the 100+ sqin of port range. can anyone confirm this for me?

pre98zetec
11-20-2008, 09:00 PM
bump... any help?

Rashaddd
11-20-2008, 09:11 PM
pm me for a quote if you want me to design you one

pre98zetec
11-20-2008, 09:26 PM
PM sent