View Full Version : thought out plan of ported enclosure ??
11-14-2008, 11:48 PM
i have been drawing up plans for a few hours and have narrowed it down to 2
it is for 2 re se12's powered by a hifonics bxi2008d with limited space 35x16x17
i have 2 plans that i am thinking of
1: dual chambered approx 1.5 cu ft @ 34hz per sub :29 sq inches of port
2: single chambered 3.2cu ft @34hz :58 sq inch of port
i personally like dual chambered for safety reasons(in case a sub goes safety.. not save a child safety) and added bracing.. but have never really played with single chambered ported enclosures before... so i thought about trying it out
what concensus do i have?
11-14-2008, 11:58 PM
eh... nm.. dual chambered seems like a winner after i got a drink and came back after thinking
11-15-2008, 12:12 AM
I take it youve finalized everything, jab? :D
11-15-2008, 12:19 AM
i am gonna take some pics when i start on it and through out it's process through the night.. which will be saturday at about 5pm... doing it for a local.. and getting paid for it.. my first truly commissioned box ever
11-15-2008, 12:21 AM
11-15-2008, 12:21 AM
This thread is worthless with out pics.
I would do the banner, but I don't know what the : command for it is and I don't feel like going Advanced for your punk *** :fyi:
11-15-2008, 12:27 AM
:wow: He hasnt made it yet...he has nothing to show, he maybe could have posted sketch-ups of the design, but he posted the specs and the pic's wouldnt change the specs...so, everything's layed out, dont know why it's worthless without pics..
And jab...apparently you're a "punk ***"...:laugh:
11-15-2008, 12:39 AM
i feel the love
11-15-2008, 12:54 AM
wow.. my computer crashed unexpectedly
yay pics of mockup
11-15-2008, 03:44 AM
Make sure to add half of the port's width to the ends of those length measurements, jab...because the wall which is also the port wall keeps going, it will still act like the port for about half of the port width out from the actual port ending...so really the port is an inch longer than adding up all the lengths from the center of the port (wont matter that much in this case, but still :)...it'll just lower the tuning a smidge)
11-15-2008, 06:13 PM
35.5 add an inch of length.. drops it down to 35.2somehting-something... not a huge difference.. but thanks for the heads up.. i wasnt really thinking about that.. durp
11-16-2008, 12:20 AM
Yea, it never is a big problem...but yea :)