PDA

View Full Version : Ported Box Build Help Quick Please!!



03F150MrSBF
11-14-2008, 06:19 PM
I just got some Pioneer ts-w1207d4 subs and now its time for an enclosure. This is going to be my first build so I need a little help. To be blunt.... How do I build it? Im pretty good with measuring and cutting so all I need is a layout with numbers to cut out! The spec sheet calls for 1.65 recommended cu ft. 2.05 max per sub. This is with a 3" x 5.5" diam port. I like the look of slot ports. So could anyone basically build me a box and give me the sizes to cut? Also if you could let me know how you got these numbers. I dont want to always ask for help but want to be able to know what im doing and help someone else out.. Also I would like (if possible) to only use (max) 3 ft. accross.(L) 1ft 4" (H) and 1ft. 2"(W) . If thats not possible then dont mind that. Thanks for any help! Or if anyone has used these subs and reccommend sealed that would be helpful to know as well.

Rashaddd
11-14-2008, 06:57 PM
If you need a box design pm me with max dimensions and what tuning/airspace you want and I'll give you a quote

traksta15
11-15-2008, 01:20 PM
check the sticky, or just find a ported box calculator

9seconlives
11-16-2008, 02:25 PM
I just got some Pioneer ts-w1207d4 subs and now its time for an enclosure. This is going to be my first build so I need a little help. To be blunt.... How do I build it? Im pretty good with measuring and cutting so all I need is a layout with numbers to cut out! The spec sheet calls for 1.65 recommended cu ft. 2.05 max per sub. This is with a 3" x 5.5" diam port. I like the look of slot ports. So could anyone basically build me a box and give me the sizes to cut? Also if you could let me know how you got these numbers. I dont want to always ask for help but want to be able to know what im doing and help someone else out.. Also I would like (if possible) to only use (max) 3 ft. accross.(L) 1ft 4" (H) and 1ft. 2"(W) . If thats not possible then dont mind that. Thanks for any help! Or if anyone has used these subs and reccommend sealed that would be helpful to know as well.



http://www.reaudio.com/speaker_box/LPort_Box_Calc.html
http://www.ddaudio.com/dd/caraudio/enclosureInfo/ExternalToInternal.asp
http://www.ddaudio.com/dd/caraudio/enclosureInfo/enclosureInfo.asp