View Full Version : Vb and Fb question
11-14-2008, 03:57 PM
Will these 2 boxes sound different?
2.236 cu.ft. @ 35.5Hz port area: 29 sq.in.
2.197 cu.ft. @ 35.7Hz port area: 33 sq.in.
11-14-2008, 04:14 PM
If the sub firing direction is the same and if the port firing direction is the same, then it's doubtful you would be able tell the difference.
11-14-2008, 04:17 PM
Any difference you hear will likely be the placebo effect
a very accurate rta may pick up differences, but only very slightly
11-14-2008, 04:25 PM
Pretty much what everyone else said. Maybe a little more port noise on the larger box
11-14-2008, 04:49 PM
Thanks a lot. That's the scale of the difference RE calc introduces when converting to slanted box according to BassBox 6 Pro. 0.2Hz or so at the tuning frequency would be insignificant I think.
I built a regular box but I miscalculated the space on the top side and now it won't fit for 3cm. I'm building a new one using RE site that will take the entire space available. Correctly this time.
11-14-2008, 09:32 PM
Nvm RE calc, I just learnt how to calculate slanted L-ports. Thanks for ur answers though, good to know that when u actually cut the wood it doesn't matted if u go 1 or 2mm off.