PDA

View Full Version : Atomic app15's in 94 accord



infamous_e46
11-14-2008, 01:22 PM
how do i fit these in my accord and what can i use to save weight ????

the guy at ace hardware was talking about ldf a lighter weight mdf has anyone used this ????

infamous_e46
11-14-2008, 03:29 PM
anyone ?

Rashaddd
11-14-2008, 03:42 PM
low density fiberboard...? you might as well just use 1/2" mdf

9seconlives
11-16-2008, 02:30 PM
NOT trying to be a smarta$$ BUT if you want to save weight then maybe you shouldn't use a pair of 18's if you try tio save on weight by skimmimg the box on a pair of 18's....it will come back on you in the end. if you have those 2 monsters in the trunk already then what's another 25-30 lbs of mdf and screws?

infamous_e46
11-16-2008, 02:39 PM
NOT trying to be a smarta$$ BUT if you want to save weight then maybe you shouldn't use a pair of 18's if you try tio save on weight by skimmimg the box on a pair of 18's....it will come back on you in the end. if you have those 2 monsters in the trunk already then what's another 25-30 lbs of mdf and screws?

wtf are you talking about they are 15's and i realize i have to give up the entire trunk i am just looking for alternative materials or ways of building that might save a little bit of weight !!!

Twistid
11-16-2008, 02:42 PM
aeroports will cut down on overall size leading to reduced weight.

infamous_e46
11-16-2008, 02:49 PM
aeroports will cut down on overall size leading to reduced weight.

i plan on using two 4inch or 6inc aero's