PDA

View Full Version : 880 prs CROSSOVER POINTS



Urmama
11-08-2008, 05:48 PM
How low can I crossover the tweeters on the 880 PRS while running 3 way active?

Jeremy M
11-08-2008, 05:49 PM
i believe it goes down to 3kz

Urmama
11-08-2008, 05:51 PM
Probably not low enough to use with my RS 180's?

Jeremy M
11-08-2008, 05:55 PM
what does ur RS 180's want to be xovered at?

Urmama
11-08-2008, 06:40 PM
http://www.parts-express.com/pdf/295-374g.pdf

2K active would be doable

Wouldn't you want the tweeters to get more of the spectrum in car audio to help raise the sound stage?

Jeremy M
11-08-2008, 08:19 PM
i thought u can raise the sound stage by good tweeter placement?

Trey803
11-08-2008, 08:21 PM
you need to switch to network mode by flipping the switch either on the back or the side of the deck

Urmama
11-08-2008, 08:52 PM
i thought u can raise the sound stage by good tweeter placement?

well yeah, but that tweeter crossover point will do wonders. A tweeter covering from 2k up sounds like it's playing full range.

tcguy85
11-08-2008, 11:10 PM
the 880 will let you cross them lower than you'll ever need. you can go as low as 1.25k.

page 60 if you want to read for yourself.
http://www.pioneerelectronics.com/StaticFiles/PUSA/Files/DEH-P800PRS_OperationManual12010.pdf

Flipx99
11-08-2008, 11:14 PM
I wouldn't cross a tweeter much below 3k. Gaps running active are acceptible.

Urmama
11-09-2008, 12:27 AM
the 880 will let you cross them lower than you'll ever need. you can go as low as 1.25k.

page 60 if you want to read for yourself.
http://www.pioneerelectronics.com/StaticFiles/PUSA/Files/DEH-P800PRS_OperationManual12010.pdf

Thanks, I had a hard time tracking that down on their website. Looks like I'll be getting an 880 afterall