PDA

View Full Version : Tweeter Xover point for XXX



Amilli
11-07-2008, 03:36 AM
I just purchased a set of XXX6.5 components from RE and would like to run it active. Would you guys be able to give the the ideal/safe crossover points at what slope to run the mids and the tweeters ? There was no white paper/specs that was included in the box

This is mostly for SQ by the way

my gear consists of

Alpine 9887
Audison VR209 (200w x 2 @2ohms) to the Mids
Audison VR203 (70w x 2 @2ohms) to the tweeters
Audio System amp 780watts@2ohms
RE SE12 @ 1.1cuft sealed box

Thanks:D

kovemaster559
11-07-2008, 03:45 AM
prolly 4khz - 18KHZ is my guess

Etac
11-07-2008, 01:14 PM
try getting in touch with the company... what kove said will almost defently be safe... but i'd try to find out the lowest you can cross them safely, because i have a feeling those mids probaly get a little sloppy towards the higher midrange.. i might be wrong.. but i wouldnt be surprised