View Full Version : Tma 5.2cs2
11-06-2008, 11:39 AM
Since TMA is JL i would expect these speakers to be decent. Does any one have any experience with these?
I am on a budget and want to stay below 100 bucks.
I need a 5.25 that handles between 40-60W. I could probably get away with a 6" as well, but 6.5 is to large.
11-06-2008, 11:56 AM
The TMA amps seem solid but the comps and subs i was not impressed with. I would get a better quality comp.
11-06-2008, 01:28 PM
how about these
11-06-2008, 01:32 PM
^^the Pioneer D series are awesome for the price. I would do 6.5"s though if you can fit them.
11-06-2008, 01:51 PM
the 6.5s of those are more like a 6.75. I cannot fit them. I will use them along with a Dayton 6" as a dedicated midbass. do you think this will work well?
11-06-2008, 01:52 PM
^^just do a little cutting :) You should be okay..I just prefer 6.5"s over 5-1/4"s in component sets.
11-06-2008, 01:55 PM
Basically I have two holes in each door that need to be filled. A single TXA-3004 (75x4) and a TXA-3002 (150x2 / 600x1 bridged). i dont want to buy any more amps or do any more cutting. The holes are each about 4.8-5 inches. I can use this wierd drill bit my friend has to grind them to a slightly larger size, but not much.
I want to fill these holes and be able to run it all off a 4 channel amp. so I was thinking a passive set and a dedicated midbass or a passive set and a smaller coaxial.
11-06-2008, 01:58 PM
we are on the same page about what we prefer... but trust me. the larger size will not fit
11-06-2008, 10:26 PM
You haven't even mentioned what car.