View Full Version : check these dimensions
11-05-2008, 05:28 PM
this sound any good. what would that betuned to?
Maximum mounting depth: 14-3/8"
Cutout dimension: 11-1/4" x 11-1/4"
Per chamber: 1.074 cubic feet
Total port volume: .275 cubic feet
Dimensions: 17"D x 32"W x 14"H
11-05-2008, 05:30 PM
This tells us nothing about the box.
11-05-2008, 08:11 PM
can this. tryin to see if this would be a nice box...
11-05-2008, 08:16 PM
lets see here. 1 cu ft per 12" L5/L7. seams about 2-3 time to small. and that tiny port wreeks of port noise. i dont care what its tuned too. this box is junk. man up kid and get someone on here to build u a realy box!
11-05-2008, 08:22 PM
ok. then why does kicker put them in their prefab boxes whixh are about the same size and they are pretty dang loud? just wonderin
Their pre-fab boxes are a little better than that box is :fyi:
11-05-2008, 08:29 PM
that box is junk i had my l5's in lil pre fab before i built my box and they sounded like **** werent as loud or deep as my custom box. i also gained about 3 db's over the prefab. will it work yes will it sound good no.
01 S 10
11-05-2008, 08:34 PM
seems to be tuned to about 40hz by calculating those dims, IMO go with about 2-2.5 cubes PER sub tuned to mid to low 30's.