PDA

View Full Version : 1 ft^3 tuned at 35 hertz plans?



mdereske
10-31-2008, 11:21 PM
In the free box plans, there is a plan for a 1 cubic foot ported box tuned to 35 hertz. When I get my RE SR 10, I would like to build one of these boxes as well as the sealed and see which I like better. Only problem being that the plan in the sticky is not there.

Does anyone have it backed up, or able to get me the plans? thanks in advance, I appreciate it.

revrider1
10-31-2008, 11:23 PM
I have a 1.5@32hz for an SE? I have a sealed one also...

IDSkoT
10-31-2008, 11:25 PM
Uhh.
12x12x12 Internal specs

A 2.5" Aeroport goes back 9.36".

You won't be able to do a slot port for a box that small tuned that low.

GearGuy2001
10-31-2008, 11:59 PM
Uhh.
12x12x12 Internal specs

A 2.5" Aeroport goes back 9.36".

You won't be able to do a slot port for a box that small tuned that low.

So OD the box would be like 13x13x13 (the includes the port displacement)

Also that assume 3/4" MDF

mdereske
11-01-2008, 09:49 PM
So OD the box would be like 13x13x13 (the includes the port displacement)

Also that assume 3/4" MDF


If its 3/4" MDF, wouldn;t that be 13.5" on all sides due to double 3/4 = 1.5 inches extra?

I would do 1.5, but the manual I read says 1 ft^3 max. and thats for maximum efficiency.

Where do I get an Aeroport? online?

ls2poweredgoat
11-01-2008, 09:51 PM
www.partsexpress.com

mdereske
11-01-2008, 10:02 PM
Would I just move teh sub into a corner, and the port in the other, or put the port on the side. I would think corner/corner on the front? I looked on PE, but couldn't find a 2.5" that went 9.36" long. What to do?