PDA

View Full Version : Anyone bored and wanna sketch up a box design for me?


OoMesKoO
10-31-2008, 02:42 PM
I just went out and took some measurements to fit a box in the back of my Explorer...

Came up with this.






depth 10"

width 44"

height 16"




Thats pretty much what I have to work with. Id like to do 4 8"s ported.

Any ideas?
OoMesKoO
10-31-2008, 02:46 PM
I would say its around 3 cubes.... no?


Would Aeros work?
OoMesKoO
10-31-2008, 03:00 PM
Ive got 2 4" Aeroports sitting here...


14" from flare to flare.


in 3 cubes, what would 1 port make the tuning freq?

What about 2 ports?
OoMesKoO
11-01-2008, 02:28 PM
Nobody wanna help a brotha?
orangecounty1
11-01-2008, 02:29 PM
pm me the dimensions

iill draw it up when i get home

id do it now at work, but i dont wanna download on the work PC.

i get home in about 1.5 hrs
OoMesKoO
11-01-2008, 02:45 PM
pm me the dimensions

iill draw it up when i get home

id do it now at work, but i dont wanna download on the work PC.

i get home in about 1.5 hrs



Thats pretty cool of you man!

I appreciate it.




depth 10"

width 44"

Height 16"



I want to do 4 8"s firing up. I do have 2 4" Aeros, measurements are listed above. If I was to use either 1 or 2 of those, what would my tuning freq. be? If not, a slot port design will do.

Would like to tune around 35 or so. If the aeros will work, and I have to sacrifice some low end for ease of just screwing these in... so be it.

Thanks a million man!
DonH
11-01-2008, 08:24 PM
how u want the subs facing? im bored and would love the draw it up in 3d!
DonH
11-01-2008, 09:04 PM
ok ill post the pic here and ill shoot u a pm!

heres the design

http://img135.imageshack.us/img135/8273/46348304tn9.png (http://imageshack.us)
http://img135.imageshack.us/img135/46348304tn9.png/1/w640.png (http://g.imageshack.us/img135/46348304tn9.png/1/)
OoMesKoO
11-02-2008, 08:01 AM
That is exactly how I want it.

Lol.

Thanks man!

Now... to just figure out the tuning frequency.
DonH
11-02-2008, 12:54 PM
ok thats where im screwed i have no clue how to figure out the tuning freq! sry about that i will have to go and read sum tuts for ya and ill get back at this thread.
DonH
11-02-2008, 01:03 PM
ok so the box is tuned to 40.129 hz with two ports! :D


with one port it will be tuned to 28.375 hz!

so i would go with the two ports.

u want the box tuned to 35hz?

if so let me no i will design up the box with a vent. its up 2 u
Joseph K
11-02-2008, 07:16 PM
Nice
DonH
11-02-2008, 07:22 PM
when are u planning on building this?