View Full Version : Any info on how to build custom trunk setups?

10-30-2008, 06:09 PM
Looking for a write up on how to do custom builds with plexiglass and such. Pictured below is a Audi S4 with a kind of setup I want to run except with 2 12'' FI Q's, but I really don't know where to start. Any help would be appreciated please (just scroll down to the pictures and you will see the setup).

http://cgi.ebay.com/ebaymotors/Cars-Trucks___S4-2-7-Twin-Turbo-NO-RESERVE-super-clean-original-miles_W0QQitemZ160295411006QQddnZCarsQ20Q26Q20Truc ksQQddiZ2282QQcmdZViewItem?hash=item160295411006&_trkparms=72%3A727%7C39%3A1%7C65%3A12%7C240%3A1318&_trksid=p4506.c0.m245

10-30-2008, 09:42 PM
have you built any boxes before as that might be a tad much for your first build?

10-31-2008, 03:16 AM
My advice: one piece at a time. Setups like that usually have a center box for the sub, side boxes for the amps, a false floor, and it looks like he has a finisher piece that holds the CD transport and something else.

VW/Audis are easy because they have fairly rectangular trunk areas. Curves = more complexity.

Basically, you want to put a bunch of boxes together so they look like one piece, and don't move around (carpet helps a lot with this).

10-31-2008, 07:58 AM
Yeah, I think I would know what to do, I just don't know what the inside of the box and the sides look like, and how to bolt the box so it doesn't move. Should the box be bolted to the sides, the bottom of the trunk? A diagram would help out a ton if anybody think they can draw or find me a simple one to get an idea.