PDA

View Full Version : alpine cda-9853 turning off internal amp



blazinb2000
09-12-2008, 10:31 PM
How do I turn off the internal amp of my alpine cda-9853? The owners manual is really vague.

dragnix
09-13-2008, 02:37 AM
you can't? Or perhaps i didn't know mine could :crazy:

blazinb2000
09-13-2008, 02:52 AM
In the owners manual it says:

External amplifier: when an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier. Power-ic off, use this mode when the front and rear amplifier of the unit are used to drive an external amplifier connected to the speakers. in this setting, the head unit's internal amplifier has no output to drive speakers.

How do I get to the power-ic off setting? It just tells what it is, not how to turn it on/off.

Rexter9x
09-13-2008, 05:41 PM
I think its under the audio menu, the title should say IC something or other..... If I get a chance I'll run down and check mine. But it is in the setup menus

69chevelle
09-14-2008, 10:12 PM
It's under the setup menu. look for IC ON/OFF. Once you get there you may have to push the rotary dial to change it. I have a 9851 and my daughter has a 9885 and that is how they work.

blazinb2000
09-15-2008, 12:45 AM
Thank you for the replies I will be sure to check it out tomorrow.

atticusdog
09-20-2008, 01:51 PM
Hi i had also been wondering about this so i tried and succesfully turned off the ic amp but now get no sound/power at all . anyone know why and what to do? thanks!Dave