PDA

View Full Version : Frequency



TRAVIESO
06-22-2003, 01:18 AM
What frequency should I set my Diamond Audio S600s to? I listen to Hip Hop and rap.

mgaidica
06-22-2003, 01:19 AM
u have spec's on them? or a link.. that would help greatly as im not familiar with them ;)

TRAVIESO
06-22-2003, 01:32 AM
Originally posted by mgaidica
u have spec's on them? or a link.. that would help greatly as im not familiar with them ;)


www.diamondaudio.com
look for S600s

mgaidica
06-22-2003, 01:37 AM
my internet isnt allowing me to get on there, ill have to try in a lil..

paikiah
06-22-2003, 01:38 AM
S600s

General
Cone: Kevlar/Nomex Sandwich
Tweeter Cone: Silk
Type: Component
Crossover Included: Yes
Drivers: Tweeter, Midbass
Drivers per Channel: 2
Specifications
Power(Watts): 20-170
Imped (ohms): 4
Sensitivity(dB SPL): 91 (w/2.83-V input @ 1 meter)
Freq,. Response: 42Hz-22Khz(กพ3dB)
Dimensions
Midrange
Mount Depth: 2-1/8"
Diameter: 6-1/2"

Tweeter
Dia: 1"
Mounting Type: Flush, Surface, Angle

Description:
6.5 Inch HEX Component System with Silk Tweeter

TRAVIESO
06-22-2003, 01:57 AM
Originally posted by mgaidica
u have spec's on them? or a link.. that would help greatly as im not familiar with them ;)

S600s

General
Cone: Kevlar/Nomex Sandwich
Tweeter Cone: Silk
Type: Component
Crossover Included: Yes
Drivers: Tweeter, Midbass
Drivers per Channel: 2
Specifications
Power(Watts): 20-170
Imped (ohms): 4
Sensitivity(dB SPL): 91 (w/2.83-V input @ 1 meter)
Freq,. Response: 42Hz-22Khz(กพ3dB)
Dimensions
Midrange
Mount Depth: 2-1/8"
Diameter: 6-1/2"

Tweeter
Dia: 1"
Mounting Type: Flush, Surface, Angle

Description:
6.5 Inch HEX Component System with Silk Tweeter


__________________

mgaidica
06-22-2003, 01:59 AM
when u say what freq., u mean on the amp or what?

TRAVIESO
06-22-2003, 02:01 AM
Originally posted by mgaidica
when u say what freq., u mean on the amp or what?


yes

paikiah
06-22-2003, 02:03 AM
highpass at the point where you set your sub's amp to... about 80~100Hz.

TRAVIESO
06-22-2003, 02:05 AM
Originally posted by paikiah
highpass at the point where you set your sub's amp to... about 80~100Hz.

thank you