PDA

View Full Version : 9887 Internal Amp



avinar
08-25-2008, 04:49 AM
May the internal amp outputs of this HU be bridged?

zack39648
08-25-2008, 04:54 AM
no i would advise against it unless you want to blow your preamp .. why would you want to bridge them .. trying to get more power to 1 set of speakers ???

blackbonnie
08-25-2008, 04:57 AM
simple answer. no, leave it at that, no reason to ever do that. you will blow your internal amp as the impedence it is at is the lowest it will go. if you wanna run more power to your speakers, amp them

avinar
08-25-2008, 05:27 AM
I'm not going to bridge the preamps, but just the amp outputs for using with Alpine SBS-05DC!

blackbonnie
08-25-2008, 05:30 AM
do you mean the rca's?

ultimate157
08-25-2008, 08:43 AM
No, do not bridge the channels unless you want to fry your HU.

jdc753
08-25-2008, 10:26 AM
:word:

Don't do it unless ya wanna screw things up.

skadude016
08-25-2008, 10:36 AM
go for it! see what happens :)

Fusion_FREAK
08-25-2008, 10:45 AM
Give me the 9887, and I'll give you this old *** 9803 I have sitting here. This way, when you blow it, it will only be a cheap radio.

bumpin buick
08-25-2008, 10:47 AM
do it, lets see what happens

avinar
08-25-2008, 01:27 PM
No, not the RCAs!

ruel1977
08-30-2008, 10:24 AM
so what do you mean you want to bridge?.. if you want a high output from ur head unit get a line driver!!!

ultimate157
08-30-2008, 11:26 AM
so what do you mean you want to bridge?.. if you want a high output from ur head unit get a line driver!!!

Umm... No.

Line driver is used for boosting the signal voltage of an RCA.

memphis_vette
08-30-2008, 11:29 AM
biches running wild