PDA

View Full Version : new box help



schrummy
08-23-2008, 12:40 AM
k. first off i got a 98 cavalier z24 and right now i got a t-line with 2 12s firing towards the rear of the car. i want to do something different for next year. 4th order anyone.....
http://i261.photobucket.com/albums/ii65/schrummy_14/4thorder.jpg

i dont know how well this one will work. i dont know if it would be better to have it fire through the rear deck or like this one is. the trunk will be sealed off either way from the cabin. what do you think i should do....
go 4th order or just do a huge ported box.....

skadude016
08-23-2008, 12:43 AM
ever tackled a band pass design?

schrummy
08-23-2008, 12:46 AM
nope but i would like to learn.
i did this with help from winISD

skadude016
08-23-2008, 12:48 AM
Ok

Well I'll tell ya now. When I tried modeling it up in WinIsd it was supposed to peak at 46hz. But when it got into the vehicle it was peaking in the high 30 hz's. So what you see on paper is not going to be what you get in real world. What are the specs on the box?

schrummy
08-23-2008, 12:50 AM
sealed chamber=2.2 after displacement
ported chamber=5 after displacement
tuned to 75hz peak at 78hz

schrummy
08-23-2008, 01:06 AM
this is the other one i was thinking about doing.
http://i261.photobucket.com/albums/ii65/schrummy_14/4thorderportthroughreardeck.jpg

schrummy
08-23-2008, 05:28 PM
bump

schrummy
08-24-2008, 02:04 AM
bump it

schrummy
08-24-2008, 03:04 AM
night bump

should i just build it and see what happens?????

schrummy
08-24-2008, 11:31 PM
i need help

schrummy
08-26-2008, 01:47 PM
some one. any one. i will take any advice.

galacticmonkey
08-26-2008, 11:57 PM
Never done a burp bandpass before...

Try modeling in WinISD something like 2 cubes sealed and 6 ported tuned to 60hz or so. Just go from there.