PDA

View Full Version : 15" fi q sealed box



clubcar13
08-08-2008, 08:40 PM
hey guys,

I am going to go with a 15" fi q in my 04 f150. I am going to have to make a sealed box because space is a very big issue. i have come up with some dimensions that give 2.5 cubes sealed. On the fi site it says to have 2-2.6 cubes. So tell me if you guys think this sounds good?

17x17x15. the sub will be firing up just like the picture of my old sub setup. so it will go 15 inches from floor to roof and then 17x17 from right to left door and back to front of truck.

My next question is... when i cut the wood, should the inside of the box be 17x17x15 or should that be the outer dimensions of the box when using 3/4" mdf wood.

My last question is... do you guys think the sub will be fine in that box or do you think I should make it any smaller or bigger?

thanks,
Mike

http://i170.photobucket.com/albums/u245/clubcar13/P2270011.jpg
http://i170.photobucket.com/albums/u245/clubcar13/100_3145.jpg

jbizzle
08-08-2008, 08:42 PM
Can you not remove the bottom piece of that chair, i'm pretty sure you can fit a ported box right in between there.

clubcar13
08-08-2008, 08:56 PM
I need to leave it because sometimes i need to take the sub out and use that chair. I heard that the Q can sound good in a sealed box. Am I mistaken?

bushtree
08-08-2008, 09:19 PM
yes the Q can sound good sealed... i build a 2cuft sealed box in the same place in my old F150 to run my 15" TC2k.

It sounded Awesome.

clubcar13
08-08-2008, 09:23 PM
yes the Q can sound good sealed... i build a 2cuft sealed box in the same place in my old F150 to run my 15" TC2k.

It sounded Awesome.

sounds sick.

bushtree
08-08-2008, 09:25 PM
sounds sick.

im lookin for some pictures of that old setup for you, but im having trouble finding them... dunno where i saved those pictures too...