PDA

View Full Version : 1st post building my first box ned help



nthngnss844
08-06-2008, 07:32 PM
i have two sony x plods i want to know what is the best box dimensions for these subs and do these subs like ported or a sealed box...if anyone can help me out i would greatly appreciate it

bonesninja
08-06-2008, 07:33 PM
sealed box...and we would need to know what model


and welcome

nthngnss844
08-06-2008, 07:58 PM
model? of the car..the car is a 2007 focus sedan and the subs are xs-l121p5....12inch subs

bonesninja
08-06-2008, 08:04 PM
i'd go about 2cf net sealed

johndoe1234
08-06-2008, 08:05 PM
you just need 1 cuft for each sub for a sealed box
Edit: ^^^ beat me

jdc753
08-06-2008, 08:12 PM
Also if you are looking for dimensions to build the box it would be beneficial to us if you gave us the maximum dimensions you can go inside the car. Also remember that it has to get stuff through the opening in the trunk too.

And Welcome to the site, there is plenty to learn on here.

nthngnss844
08-07-2008, 12:54 AM
i'd go about 2cf net sealed


ok new so spare me what is 2ct...and i wanted to build a box that was about
30inches across 18 inches tall..and width im not sure how much room should i leave between the magnet and the back board?

nthngnss844
08-08-2008, 12:13 AM
wow ok srry just realized u ment 2 cubic feet

FurbiesAndBeans
08-08-2008, 02:36 AM
for the width you might wanna go with 7.5

So it'd be: 30 x 18 x 7.5

That should give you roughly 2.1 cu ft net volume inside. You have to use 3/4" wood for those dimensions