PDA

View Full Version : Whats your Box Port Tuned to? (thread)



kicker33
08-05-2008, 12:39 AM
and how many cubes is your box.....curious.
thanks.

allout13
08-05-2008, 12:41 AM
3 cuft 34 hz

boomzilla
08-05-2008, 12:42 AM
2.25 @ 32hz

Buck
08-05-2008, 12:43 AM
4 @ 32 hz

tcguy85
08-05-2008, 01:01 AM
.7 tuned to 30

loudcartunez
08-05-2008, 01:03 AM
@7 cubed and i have removable ports one (daily) tuned to 29hz and (burp) 46hz

Buck
08-05-2008, 01:04 AM
poll?

NissanKicker
08-05-2008, 01:23 AM
5.67cuft @ 32hz

NissanKicker
08-05-2008, 01:24 AM
EDIT: 7.38 @ 32hz

Calikid
08-05-2008, 01:24 AM
0 cubes at 0hz

no box yet.

bobtista
08-05-2008, 01:26 AM
2.6 @ 40

x2o
08-05-2008, 10:26 AM
4 @ 35

blazeplacid
08-05-2008, 10:28 AM
sealed :cool:

skmfkr
08-05-2008, 12:22 PM
in sig

lincolntc690
08-05-2008, 12:23 PM
4.1 @33Hz

stuckinok
08-05-2008, 12:25 PM
*****....

dman4486
08-05-2008, 12:26 PM
2ft^3 per chamber @ 24hz

Ed Lester
08-05-2008, 12:26 PM
do complex enclosures count?

Box is 5 cubes at 45-80 hz and 7.5 cubes below 45 hz.
F3 tuning at 28hz.
Peak frequency at 32, 36, 42, 46, 47 hz.

Thats what it is this week, will change again next week.

teen
08-05-2008, 12:27 PM
6ft^3 at 35hz.

jdawg
08-05-2008, 12:27 PM
4 @ 35

hows that crunch workin for ya?



3 sealed right now

James Bang
08-05-2008, 12:28 PM
what's a box?

5.3bowtie
08-05-2008, 12:36 PM
current: 2.25 @ 44hz but will be changing shortly.

James Bang
08-05-2008, 12:49 PM
dont need a box, and I get lower than most ported boxes

:veryhapp:

WhoSayWho?
08-05-2008, 12:51 PM
dont need a box, and I get lower than most ported boxes

:veryhapp:

Oh, you of all people need a box.

poundindak69
08-05-2008, 01:38 PM
1.8ft^35hz and soon to be 5.5-6Ft^@32-35hz

x2o
08-05-2008, 01:46 PM
hows that crunch workin for ya?



3 sealed right now

That crunch works great. It gets hot though, but it hasn't thermaled on me. At full tilt it only drops my voltage to about 13.1, or 12.7 if I have the a/c cranked :p:

Real men don't need A/C though. :D

Apocalypse boy
08-05-2008, 01:48 PM
5 cubes @ 33hz

MTXman
08-05-2008, 01:51 PM
~4 cubes @ ~34hz.

J31Rob
08-05-2008, 01:52 PM
MY last box was 4.5 @ 35 hz, **** 7" port for my AQ HD3 15".

na_rsx
08-05-2008, 01:52 PM
2.5 @ 32hz

mlstrass
08-05-2008, 02:55 PM
dont need a box, and I get lower than most ported boxes

:veryhapp:

But you're probably too quiet for most of the kids on here :D

greg2100
08-05-2008, 11:23 PM
6.9 @ 35hz

bdawson72
08-05-2008, 11:25 PM
7.5@32hz

skadude016
08-05-2008, 11:28 PM
6.5 @ 30hz

twistedmind
08-06-2008, 08:32 PM
2.4 @ 33Hz

hatemonger
08-06-2008, 08:33 PM
2.2 @ 26 hz

fbi90909
08-06-2008, 08:42 PM
i don't know. i just picked up some scrap wood from the dumpster and glued them all together to make a box. i also drilled 32 holes around the box for porting so i guess it's 32hz.
it's loud man.

NT_Hardcore
08-06-2008, 08:55 PM
12cuft @ 32hz

SethPhillips
08-06-2008, 08:57 PM
4cuft 39 hizirt's

hoxie08
08-06-2008, 09:04 PM
4 cubes @ 32hz for my SE's.
1 cube @ 40 or 32 for my 1508.

(I switch setups back and forth from time to time)

Scott15
08-06-2008, 09:06 PM
3.3 @ 35 :crazy:

PV Audio
08-07-2008, 12:45 AM
Which of the 30 do you want to hear about? :laugh:

BushJ311
08-07-2008, 12:50 AM
3 Cu Ft tuned to 30 Hz

thur5d4yf4n
08-07-2008, 01:11 AM
8 @ 35hz

Lakota
08-07-2008, 01:50 AM
I don't know what any of my SPL boxes have been tuned to:)

BigJoker
08-08-2008, 08:36 AM
4.25 @ 35hz

pr-festiva
08-08-2008, 08:40 AM
about 18 cubes @63 or 40 hz with plug

ContourSPL
08-08-2008, 09:20 AM
2.5 cubes on the sealed side, 7.5 cubic foot tuned to 45 hz on the ported side

tooshort_128
08-14-2008, 10:55 AM
2.5 @ 32 hurts for my 12" Fi Q

Lakota
08-14-2008, 01:18 PM
40+ I think.

L7BASSHEAD
08-14-2008, 01:19 PM
check my sig

Bun-Bun
08-14-2008, 02:06 PM
2 chambers 2.5ft^3 (ea) @ 36Hz

James Bang
08-14-2008, 02:12 PM
But you're probably too quiet for most of the kids on here :D

you would assume. I gets plenty loud. It impressed the local basshead, donpisto :p: . Over powers my pair of 8" mids easily. I also don't have the need to get retardedly loud as most kids on here.

MikeyB
08-14-2008, 02:17 PM
The BTL enclosure was 8.4 cube @ 32hz before I tore it out, the new one for the XXX will be 3.25 cube @ 31hz, and the one thats in there right now is 4.5 cube @ 34hz.

Low tuning FTW!

etc.
08-14-2008, 03:27 PM
2.6 cf @ 33hz

Pioneer~Saturn
08-14-2008, 03:43 PM
4.8 cubes net @ 31Hz

SSon22s
08-14-2008, 10:43 PM
I have seen alot of ppl tuned @ 32hz, I just picked up 2 12"w6v2s and planning a build for them, is 32hz a good spot to tune at?

bum123
08-14-2008, 10:52 PM
45+ but that wont be good for daily.

MotoRacer243
08-16-2008, 10:16 PM
1.35 @36 for now.

3.5 @32 soon.

rdaudioman1256
08-17-2008, 03:05 AM
4.2 @ 32Hz.

Random1010
08-17-2008, 03:06 AM
12 at 35hz

soon to be 18 at 50hz

Haunz
08-17-2008, 03:10 AM
Low tuning FTW!

I always tune my ported boxes around 20Hz..... THAT IS LOW TUNING FTW...

;)

SSon22s
08-20-2008, 12:33 PM
NOOB questions....What is the biggest difference in tuning a box 28hz vs 32hz, I want to build a box for my 2 12w6v2s and JL specs recommend 32hz, I didnt know if Id benefit by lower tuning

loud-n-low
08-20-2008, 12:35 PM
2.0 cubes @ 27hz

godhatescivics
08-20-2008, 12:50 PM
13.8 cubes 32hrtz 218 sq inches of port

mackin
08-20-2008, 12:59 PM
2.25 @ 32 hz

tez4life
08-20-2008, 01:07 PM
4 @ 28hz Single RL-p 15"

ChanzSafari
10-14-2008, 11:06 AM
21 cubes @ 30 hz

4 btl 18's

donpisto
10-14-2008, 11:18 AM
0 cubes, 0 Hz....unless I get the car I'm wanting then 1 cu. 0 hz :D

groundpound4200
10-14-2008, 11:21 AM
9 cubes, 144.5 sq. inches of port, tuned around 35

99grandprixGT
10-14-2008, 11:22 AM
4.0 cubes to 33hz

Pioneer~Saturn
10-14-2008, 02:12 PM
4.8 net @ 31Hz