PDA

View Full Version : Sub circle cutting



BigOleDom
08-03-2008, 11:31 PM
What method do you guys use to cut circles for your guy's subs. I know the basics of woodworking and such, but how would I go about cutting out the circles for the subs.

djman37
08-03-2008, 11:32 PM
jasper jig is what I use. Get the 2-pack on partsexpress.

big dawg
08-03-2008, 11:33 PM
a router and a circle jig. flat out the best method if you know how to use them. Remember measure twice and cut once is always key...

kovemaster559
08-03-2008, 11:34 PM
router and a gheeto jig! made of 1/16 wood!

KCha
08-03-2008, 11:34 PM
i went to a framing store and got some scrap 1/8 plexi works wonders for a jig =)

KHARPS
08-03-2008, 11:35 PM
http://i313.photobucket.com/albums/ll385/tezin87/100_1702.jpg

rc10mike
08-03-2008, 11:37 PM
Jasper Jig 200, makes PERFECT circles, its all you need....and a plunge router.

BigOleDom
08-03-2008, 11:47 PM
How much are routers, or any other method that I could use to cut the circle?

rc10mike
08-03-2008, 11:52 PM
There are a lot of other methods, like a jig saw, Rotozip for example, but a router w/ jig will give you perfect results.

BTW, the Rotozip tried to kill me many times.

BigOleDom
08-03-2008, 11:54 PM
whats a rotozip?

rc10mike
08-04-2008, 12:00 AM
Its a cross between a Dremel and a true router, dont buy it. Its not powerful enough to cut mdf, and it tried to kill me.

BigOleDom
08-04-2008, 12:02 AM
If I didn't have any of the aforementioned tools what would be the cheapest to buy?

miker
08-04-2008, 12:03 AM
I us a roto zip.. But It won't help much with anything over 12" ... well the jig that I have for it anyway..

Alpineforever
08-04-2008, 01:29 AM
I use a compass and a jigsaw.
But that's because I'm real good at keeping my hand steady and cutting perfect(ish) circles, if you can get a jig with a clutch it helps a lot compared to a one speed jig.

Rashaddd
08-04-2008, 01:32 AM
ruler and a jigsaw