PDA

View Full Version : subs.. inverted / isobaric



pookie7919
06-12-2003, 11:14 PM
aight.. not sure if this the right foroum for this or not. but here goes.. okay.. got 2 of teh 10" poweracoustik mofo's... i have 1 in my truck now.. on a power acoustik 2400D amp.. i was wonder which would be the best todo.. or if it would be good todo at all.. okay the box i have now is about 1.4cubicft.. was wondering if.. mounting 1 sub in and one inverted.. on the same box would aight or not enough airspace or if it would actually mess up the inverted one.. or would i be better off with an isobaric setup ..

MikeofTulsa
06-12-2003, 11:23 PM
so long as u reverse the polarity of the one that is flipped it should be fine.....

mgaidica
06-13-2003, 02:08 AM
i dont think ur lookin for isobaric... ide stick with one cone side, one magnet side, and like goddyd4me said, reverse polarity on the magnet one.

pookie7919
06-13-2003, 02:11 AM
okay.. was just making sure it wouldn't mess up the inverted sub with both subs useing the same airspace in the box..

mgaidica
06-13-2003, 02:15 AM
yeh ull be just fine..

fantomas
06-13-2003, 02:18 AM
it shouldnt as long as both subs are getting the same power and are both working properly.

pookie7919
06-13-2003, 02:21 AM
yeah both subs work... and will be wired to the same amp.. mono amp.. should get the same amount of power ... either series or parallel which ever i can get 1 or 2 ohms out of..

fantomas
06-13-2003, 02:24 AM
i would say probably parallel....if one sub blows...(for whatever reason) then the other will not function properly. but you'll be fine from what i've read...

pookie7919
06-13-2003, 02:33 AM
ah.. heh dual 1 ohm vc.. par. from 2 subs would be 1 ohm right ?.. an i'm under powering the subs. with all the gains on the amp down.. cept the level which is at like 25%