View Full Version : burp box design needed will pay $
07-24-2008, 07:23 AM
ok, it looks like my project is off to a rough start, the next comp here is the first or next month (next friday) and i need someone to design me a burp box
car was loudest at 45hz with 2 different sub setups
box will be for a single fi bl fully loaded 15
max height 15" max width 30" max depth 32"
will be going in the trunk of a 95 grand am w/ no rear seat
will be getting roughly 1400w rms
luckily a friend is letting me borrow his amp for the comp.
i'm not sure what other info is needed, let me know
07-24-2008, 03:56 PM
07-24-2008, 03:59 PM
hmm you just want a ported box tuned to 45hz? what sub/port configuration? I could whip something up and get the ideas flowing.
07-24-2008, 04:16 PM
basically yea, just need a raw spl box
07-24-2008, 06:56 PM
I could probably get you one for pretty cheap.
Any idea what you want it tuned to?
07-24-2008, 07:15 PM
3 cubic feet 50" of port tuned to 45hz.. it'll fit turned around in any direction so you can play with firing the woofer in different directions. I didn't put it on there but i would do a double baffle w/ a flush mount.
If your interested in all of the design pm me.
also... you can try 45's in the enclosure if you'd like but i lost .4 db from adding 45's to the box in my truck.
07-25-2008, 12:41 AM
personaly if ur going for spl why would u want a box tuned to 45. i have my box tuned to 50 and im still playing 45 hz burbs
07-25-2008, 12:42 AM
srry didnt read the top fully. reading>me
07-25-2008, 12:45 AM
In a grand am I would tune more like 40 hertz. Remember do not tune to the car peak frequency, make the combination of box and car peak at 45 hertz.
07-25-2008, 12:49 AM
i've found that vehicles are loudest when tuned to their resonant frequency. I'm tuned to 45 and burp @ 46.. i started tuned to 42 and every time i cut my ports down i gained.. going up 1 hert at a time.
although, something may come into play with being underpowered that would make you want to tune lower.
07-25-2008, 03:37 AM
i wont be under-powered rms is 1300 watts loaded, i will be pushing 1400 so i will be 100w over rated daily power, i know its not insane power....but its the best i can do for now.
what kinda wattage can i show these for burps anywho?
07-25-2008, 10:09 AM
its hard to say, in a burp application i'm sure the coil and all that can handle well over 1500 rms but i don't know if the suspension will hold up to that.
07-25-2008, 03:47 PM
i saw a vid on yourtube with a guy claiming to be running 3600w rms to 2 loaded 15"bl's daily, not sure if i believe him.....lol
07-25-2008, 08:42 PM
i'm running 3.2k to 2 fully loaded bl 15"s daily and they take it no problem. if you wanna burp it i's go at least 2k.