PDA

View Full Version : burp box design needed will pay $



GohillaAudio
07-24-2008, 08:23 AM
ok, it looks like my project is off to a rough start, the next comp here is the first or next month (next friday) and i need someone to design me a burp box

car was loudest at 45hz with 2 different sub setups

box will be for a single fi bl fully loaded 15

max height 15" max width 30" max depth 32"

will be going in the trunk of a 95 grand am w/ no rear seat

will be getting roughly 1400w rms

luckily a friend is letting me borrow his amp for the comp.

i'm not sure what other info is needed, let me know

GohillaAudio
07-24-2008, 04:56 PM
bump

bass-aholic
07-24-2008, 04:59 PM
hmm you just want a ported box tuned to 45hz? what sub/port configuration? I could whip something up and get the ideas flowing.

GohillaAudio
07-24-2008, 05:16 PM
basically yea, just need a raw spl box

Atimm693
07-24-2008, 07:56 PM
I could probably get you one for pretty cheap.

Any idea what you want it tuned to?

profundus-sanus
07-24-2008, 08:15 PM
http://i33.photobucket.com/albums/d55/ratherbriding99/45splbox.png

3 cubic feet 50" of port tuned to 45hz.. it'll fit turned around in any direction so you can play with firing the woofer in different directions. I didn't put it on there but i would do a double baffle w/ a flush mount.
If your interested in all of the design pm me.

also... you can try 45's in the enclosure if you'd like but i lost .4 db from adding 45's to the box in my truck.

schrummy
07-25-2008, 01:41 AM
personaly if ur going for spl why would u want a box tuned to 45. i have my box tuned to 50 and im still playing 45 hz burbs

schrummy
07-25-2008, 01:42 AM
srry didnt read the top fully. reading>me

R/T Pimp
07-25-2008, 01:45 AM
In a grand am I would tune more like 40 hertz. Remember do not tune to the car peak frequency, make the combination of box and car peak at 45 hertz.

profundus-sanus
07-25-2008, 01:49 AM
i've found that vehicles are loudest when tuned to their resonant frequency. I'm tuned to 45 and burp @ 46.. i started tuned to 42 and every time i cut my ports down i gained.. going up 1 hert at a time.

although, something may come into play with being underpowered that would make you want to tune lower.

GohillaAudio
07-25-2008, 04:37 AM
i wont be under-powered rms is 1300 watts loaded, i will be pushing 1400 so i will be 100w over rated daily power, i know its not insane power....but its the best i can do for now.

what kinda wattage can i show these for burps anywho?

profundus-sanus
07-25-2008, 11:09 AM
its hard to say, in a burp application i'm sure the coil and all that can handle well over 1500 rms but i don't know if the suspension will hold up to that.

GohillaAudio
07-25-2008, 04:47 PM
i saw a vid on yourtube with a guy claiming to be running 3600w rms to 2 loaded 15"bl's daily, not sure if i believe him.....lol

rain377
07-25-2008, 09:42 PM
i'm running 3.2k to 2 fully loaded bl 15"s daily and they take it no problem. if you wanna burp it i's go at least 2k.