PDA

View Full Version : Design my enclosure, make $6 paypal.



CrAiZ3
07-20-2008, 11:05 PM
I need an enclosure for an Audioque HDC318 tuned at 40hz. It will be in the back of a 96 Jeep Cherokee so I have plenty of room. To be honest, im novice in the box building seen. I just want it to have the loudest SPL possible, because I will be competing.

It's simple. Make me plans, and a diagram and I will happily send you $6 paypal.
Make me a "happy camper."

NOTE:
Hoping for something in the range of 6-8 cu. ft.

Specs:

http://www.audioque.com/aq/HDCSeries.htm

Space I have.
22" high.
42" wide.
30" Depth. (From back seat to trunk door.)

silvercookie
07-20-2008, 11:06 PM
should also note if you want a musical box or a fart box

RAM_Designs
07-20-2008, 11:07 PM
If you want something for pure spl, I'd suggest tuning higher(48-50hz seems to work great in those older Jeep Cherokees). If you're using it for your daily system, I'd tune lower(35hz).

miker
07-20-2008, 11:42 PM
Width and depth would be important dimensions.

yunvme666
07-20-2008, 11:47 PM
i have 2 designs for my 9518 but theyre for aeros....

miker
07-20-2008, 11:55 PM
Ok.. Here's one at 35hz and 7cf net.

40" wide, 25" deep, 18" tall.

port is 16.5" high x 6.75" wide 23" long.


Tell me if you like it... I can change the dimensions up easily too.

CrAiZ3
07-21-2008, 12:22 AM
Its going to be for daily use, however I want the max SPL out of it. Especially with the rap music I listen too.

EDIT:
edited the orignal post.

EDIT2:
Does anyone know what a shop charges for labor when building a box?

NissanKicker
07-21-2008, 12:26 AM
200 & up! for labor...

miker
07-21-2008, 12:30 AM
200 & up! for labor...

He'd be much better off finding someone on these boards to make him one I think :)

CrAiZ3
07-21-2008, 12:31 AM
He'd be much better off finding someone on these boards to make him one I think :)

;)

im talking to someone local now, and I have no idea what to charge him. All I need him to do is cut and assemble it.

After I get a design.
:)

miker
07-21-2008, 12:33 AM
Huh.. nvm

oh PM btw

iamamp3pimp
07-21-2008, 12:34 AM
6 bucks, thats all?

i used to pull 15 for my designs

never had any complaints

CrAiZ3
07-21-2008, 12:37 AM
6 bucks, thats all?

i used to pull 15 for my designs

never had any complaints

Best I can do. Moneys tight at the moment.
And someone offered one for free, so I think 6 bucks is reasonable.

psych0ticnemes1
07-21-2008, 08:27 AM
I'll do the design for that price. Shoot me a PM if you are interested.