PDA

View Full Version : HDC315, and RF P3 10 build started!!!



TC2k15x2
07-20-2008, 02:45 AM
Ok so we are almost done with the RF P3 10's enclosure, just waiting on the sub to get it. Here it is, im pretty sure the box is 1.8 cubes tuned to 40 hz.

http://img34.picoodle.com/img/img34/4/7/19/t_RFenclosurem_11bede9.jpg (http://www.picoodle.com/view.php?img=/4/7/19/f_RFenclosurem_11bede9.jpg&srv=img34)

http://img37.picoodle.com/img/img37/4/7/19/t_RFenclosurem_92d68a6.jpg (http://www.picoodle.com/view.php?img=/4/7/19/f_RFenclosurem_92d68a6.jpg&srv=img37)

We got the RF sealed up mostly and then started on my build for the HDC3, we only have one pic of the cut but ill keep yall updated tomorrow I should get more **** done.

http://img33.picoodle.com/img/img33/4/7/19/t_HDC3mdfcutsm_ef00629.jpg (http://www.picoodle.com/view.php?img=/4/7/19/f_HDC3mdfcutsm_ef00629.jpg&srv=img33)

Thats it for now let me know what you guys think.

Oh and the HDC315 will be 4.5 cu ft tuned to 36 hz.

mlstrass
07-20-2008, 02:47 AM
You could easily tune higher with the HDC in a box that big...

TC2k15x2
07-20-2008, 02:50 AM
You could easily tune higher with the HDC in a box that big...

Well I figure since I listen to so much rap it would be smarter to tune lower?

mlstrass
07-20-2008, 03:02 AM
38-40 would still hit all the lows, especially in a box that size. AQ recommends higher tuning for their subs...

TC2k15x2
07-20-2008, 04:33 AM
38-40 would still hit all the lows, especially in a box that size. AQ recommends higher tuning for their subs...

So by making the PVC a little shorter would make tuning higher correct? Im using 2 12" PVC pipes as my ports.

Also I have another question, would it matter if I had the PVC fully outside of the box it may not look good but the box will have more net volume.

TC2k15x2
07-20-2008, 05:52 AM
any input?

mazdakid
07-20-2008, 12:16 PM
you can make your ports external, you just wont have any port displacement in the box.
making the ports shorter will raise the tuning

mlstrass
07-20-2008, 12:38 PM
^^^^ what he said

TC2k15x2
07-20-2008, 04:33 PM
Cool thats what I figured. Less port displacement in the box is a better thing imo.

GrandCherokee
07-20-2008, 04:37 PM
Cool thats what I figured. Less port displacement in the box is a better thing imo.

check it out---gettin smarter---and its gettin closer to my build lol :D
btw i should be getting the slot port design tuned to 34hz anyday now

TC2k15x2
07-20-2008, 04:37 PM
**** can a mod move this to the correct place please...

95Delsol
07-20-2008, 04:46 PM
Anything look out of the ordinary on the RFP3 10 box? It's goin behind the seats in my sol

The box is 1.5 cubes btw

TC2k15x2
07-20-2008, 04:47 PM
Anything look out of the ordinary on the RFP3 10 box? It's goin behind the seats in my sol

The enclosure for the RF is 95 delsol's. :cool:

TC2k15x2
07-20-2008, 09:01 PM
Aight got a lot done today on my box, here are some pics.

http://img33.picoodle.com/img/img33/4/7/20/t_Sideonem_09292f7.jpg (http://www.picoodle.com/view.php?img=/4/7/20/f_Sideonem_09292f7.jpg&srv=img33)

http://img29.picoodle.com/img/img29/4/7/20/t_Backportsm_dec176c.jpg (http://www.picoodle.com/view.php?img=/4/7/20/f_Backportsm_dec176c.jpg&srv=img29)

http://img33.picoodle.com/img/img33/4/7/20/t_2sidesonm_5f543a5.jpg (http://www.picoodle.com/view.php?img=/4/7/20/f_2sidesonm_5f543a5.jpg&srv=img33)

http://img33.picoodle.com/img/img33/4/7/20/t_side3onm_8b4ff62.jpg (http://www.picoodle.com/view.php?img=/4/7/20/f_side3onm_8b4ff62.jpg&srv=img33)

http://img33.picoodle.com/img/img33/4/7/20/t_4sidesonm_05ee5f4.jpg (http://www.picoodle.com/view.php?img=/4/7/20/f_4sidesonm_05ee5f4.jpg&srv=img33)

http://img29.picoodle.com/img/img29/4/7/20/t_Backtopviewm_c46f8ca.jpg (http://www.picoodle.com/view.php?img=/4/7/20/f_Backtopviewm_c46f8ca.jpg&srv=img29)


and the car

http://img29.picoodle.com/img/img29/4/7/20/t_SL500andC23m_ba1088d.jpg (http://www.picoodle.com/view.php?img=/4/7/20/f_SL500andC23m_ba1088d.jpg&srv=img29)

All I have left is putting the ports in, painting the box and getting it to fit. This is really my first attempt at making a box ever so criticism needed.