PDA

View Full Version : Need Box Design!!! Will pay small fee for good design!!



pjvoc
07-11-2008, 05:23 PM
I got the max dimensions from my buddy today, his car is a saturn sc2, which has trunk bars that dip down into the trunk

I am thinking it can be a max of 30-31" length wise
also, a depth can be as deep as about 28-29"
and the height should be a little under 16"

It is a single 15, and the displacement is .4 cu ft

I would like the setup to be sub back port back, but I dont think theres enough height room to do that, so the next best thing would be sub up port back... please let me know what you can come up with and PM me

THANKS
:D:D

Rookie_80
07-11-2008, 05:24 PM
is it your Ti?
or a diff sub? which box u had for your ti?

pjvoc
07-11-2008, 05:25 PM
we tried to put the box from my car in his, but it didn't fit, and this is my 15" mmats juggernaut thats goin in his whip got any ideas?

Rookie_80
07-11-2008, 05:27 PM
we tried to put the box from my car in his, but it didn't fit, and this is my 15" mmats juggernaut thats goin in his whip got any ideas?

when it comes to boxes i don know much.

my suggestion is, although a lot of members are familiar with the specs, some are not. posting it would help a bit.

pjvoc
07-11-2008, 05:29 PM
good idea, heres the specs of the sub,

3” diameter dual aluminum voice coil.
Re Voice Coil (Ohms) 2 x 1.4
Fs (Hz.) 36
Vas (Liters) 103.7
Qts 0.43
SPL (1W/1M) 92db
Power (Wrms) 1400
Mounting Depth (inches) 8 ½
Hole Diameter (inches) 14 1/16
Speaker Displacement (cuft.) .4

tell me guys if you need to know anything else, I wanna build this weekend!!!

pjvoc
07-11-2008, 05:36 PM
cmonnnn :D i know 5$ will get someone to design one for me

jco1385
07-11-2008, 05:38 PM
i need one too :(

pjvoc
07-11-2008, 05:38 PM
hell yeah brother we are in the same boat :( i got a design for my 2 15's already but, my buddy has a ****** car to work with so its hard

miker
07-11-2008, 05:53 PM
Let's see if you like this.

16" high, 30" wide, 26" deep.

Port area of 65sq in, net volume of 4cf, and .2cf taken out for bracing .4cf taken out for sub.

I wasn't exactly sure what to take out for bracing


Anyway 4cf net at 33hz